Search results for query: 7E0959263D

https://www.t6forum.com/search/1409438/?q=7E0959263D&o=relevance

Thanks that’s great other the T6 variant appears to be £70 on average combined for the T5 around £13! But at least I know what I’m after

What is the difference between 7E0959263C and 7E0959263D? Can I use either or how do I tell which one I need?

T6: 7E0959263D Part numbers for T5 and T5.1 were as below - probably now superseded by the above. T5.1: 7E0959263C, T5: 7E0959263

Update to the above post, new resistor module part no. 7E0959263D fitted and working great, do yourself a favour and buy a 5.5mm ratchet spanner before you start, very little room between the heads of the screws and the bulkhead, so much easier!

Several T5.1 Heater Blower Thermal resistors available on the web at reasonable prices (£8 TO £25 or so) have just been quoted £60.40 for the T6,: 7e0959263d (they couldn't tell me what the difference was between the D and the C).

...Aren’t we supposed to learn from our mistakes, does anyone at VW read these forums, don’t they care about their reputation? These helpful posts have given me the confidence to go ahead and replace the resistor pack (7E0959263D) with a genuine VW part myself, thanks to everyone that has...

VW learn from their mistakes….thank you for the giggle!!!

Could just be from a different manufacturer, only parts technical would be able to find that out if it is not visually obvious. That’s why it is best to always get the part from dealer or TPS so if they have updated it, you get the latest version. ECP and the like buy up the old superseded...

Hi, hope someone can offer some words of wisdom. Long time forum lurker and researcher. I believe I’ve read the thread(s)and watched the videos on this, but I’m none the wiser. My blowers stopped working in my 2017 t6. I went ahead and replaced the 40a maxi fuse. As experienced by many, once...

Hi Chaps Just noticed tonight my heater blower is only working on speed 4. I’ve got the manual Air Con, rather than climate. All other functionality works ok, just nothing blowing out until you select the fan blower at speed setting 4. Anything obvious to check? Any known issues? Thanks

...x 0.38 ohm = 40 W However, the resistors seem to be PTC resistors and cooled by airflow thus a bit more evaluation is needed... Fortunately I have another blower in load area where access is easy so it may serve now as test platform. EDIT: part number 7E0959263D (for both front and rear...