Is there a thread or video anywhere on how to change light bulbs for these please? Am struggling and before I really start yanking stuff or unscrewing bits of front trim, i thought I'd have a check on here. Standby for photis
The right light that seems dim is a standard bulb and the left is...
Hi
I have a bonnet light bar I would like to tap into the live feed to the drl lights so it comes on when they do but not sure what colour wire I need to spice in to .
If anyone can let me know or even provide a picture of location that be great.
Thank you
With my new loom extender I have tried out the old light. The fault is not seen.
While you may think the fault is then with the headlight, I have replaced the entire unit. So there are no common parts.
A thought I did have is the current pull difference between an LED and the bulb of the...
Hi, I've replaced my headlights for my T6 with these Transporter HQ ones. The dipped beam bulbs (H7) are LED and look/work great. However, the best bulbs available for the main beam (H1) as an upgrade when I bought the lights were Nightbreaker H1s. Although these are only used when I need to use...
In an act of desperation I got a pair of the "V8 Flip Chip" H15 bulbs from Xenon Bulbs, because they reckon they 'have the strongest canbus".
https://www.xenonbulbs.co.uk/Led-Bulbs/led-headlight-bulbs/H15/H15-V8-LED-Headlight-Kit
(I wish the industry didn't talk such rubbish. Bulbs don't "have...
I’m still a way bit off but all been well the t6 bcm should see the headlights as t6 leds and not the t6.1 ones, the drl may show a fault because I think I’m going to have to powers the drl/indicator pcb directly from a 12v switched feed
To be honest I found it easier to remove the bumper and headlight after the H15 bulb broke than the struggling I had done previously trying H7 LEDs and changing them all to uprated H15 & H7 bulbs. It was the same with my MK4 Golf, bumper off headlight out, change bulb
Hey all
I am new to this forum but I could do with some help if that's ok. I have just installed the lower grille DRLS to my T6 2015-19. I got the DRL kit from Justkampers (no instructions provided) and the wires from the canbus are red with in line fuse which I believe should be connected to...
Skoda rapid pq25 2013
BCM t6 7E0937090+auto light switch(still no installed ), just waiting for all pin and wire in the moment .
Any way bixenon headlight already on board and working , only leddrl no working in some scenario and i canе blinking high beam if the light switch is in the zero...
Hi - I'm looking for some help after upgrading my headlights from H4 to H7's, please.
I've managed to use Carista Beta to enable the dipped and main beam lights to stay on at the same time (and boy oh boy, is this an improvement on the H4's! :) ).
What I am struggling with is how to disable...
I’ve gone from sh1te to bright :D
Finally got all my light upgrades fitted and working.
I’ve fitted THQ V3 all black limited edition headlights. I really like the very dark look they have and think they work well with the purple.
I got the upgraded LED main beam bulbs and the night breaker...
None and I’ve changed them all to LEDs even the side indicators.
I’ve also changed the light knob on the dash which can give you trouble when I fitted the fog light kit. And fitted 2 sets of DRLs which can also give you problems. No codes.
I wired the DRLs to an ignition feed in the fuse box...
Hi @Loader
What @Lubrown mostly said
(I had the Transporter HQ V1s with H1& H7s)
Vast improvement over std H4s.
I would question @Bigsidavies re fitting LEDs though? I believe ‘Caravelle’ headlights have twin reflector lenses. The aftermarket ones have projector dipped beam lenses, which...
V3 full LED from
https://travelinlite-transporters.co.uk/collections/t6/products/t6-drl-headlights-black-with-philips-led-6000k-dipped-beam-bulbs
they are only a 30 min drive from my house :D lethal for the wallet tbh! lol
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.