Search results for query: Kufatec

@Dav-Tec i believe I do, I followed the kufatec loom instructions and have checked these over twice

Did you buy the kufatec kit in the end? You have brake assist by the looks of it, have you coded the brake module so its aware you now how cruise control? Have you checked all your wiring connections and coding

Did you ever resolve this? I tried a different climatic unit in mine to see if it would work but it didn’t, and perhaps that has upset my system?

...that 'SWA_0x1A' is related to the RTA display. I'm very pleased you did work it out though because yet again the coding instructions from Kufatec are either wrong or incomplete, in this case incomplete. (I should add I thought the quality of their wiring harness was very nice) For anyone...

Confirmed, no PDC integration.

Not a lot of info to go on here ! You are fitting this to a T5.1 ? Are they T6 headlights ? Have you fitted a T6 BCM ? Never seen a kufatec kit so dont know how they do it Are your headlights connected, are they working, is it just the levelling you are doing know ? Give us the info of what...

If you go back to this post most of it is listed from there. You should see wiring diagrams.

...led headlight conversion I’ve got the lights in with the modules etc now I’ve come to the self levelling I purchased the complete kit from kufatec with the headlight adapters etc fitting the levellers not a problem and can see two sets of 4 wires go to them it’s the rest of where do they go...

I am thinking I will get this kit next month. Air Suspension sorted this month first via @Dav-Tec first.

Looks slick, compared to Hanshow which is slower than factory - Main reason I went factory is to get the Kufatec kit to work with PDC, and fact my boot lid as a pretty fat dip from kids pressing on it to close lid. (I.e. Needs spray job as dent folks couldn't get it out anyway!) Might be...

Haha.. mystery solved, thanks :)

The cable for the rams comes out from behind the light cluster I can’t remember what that white is for, maybe the boot courtesy light. DM me your email and I’ll send you the kufatec instructions

Turns out kufatec don't support tuning fanatics as a reseller and also won't provide manuals. Tuning fanatics said they'd send the full manual but been few weeks not, several mails and nada! T6 wiring diagram helped anyway so no biggie. Just few more questions @Deaky pls.. - Does the cable...

Kufatec do a loom for 5.1 so you shouldnt need to add anything, its the T6 retrofit that uses more cables so if you start with a 5.1 kufatec loom you have to add more wires to fit it to a T6

...headlight range control module and auto lights and rain sensors with different headlight switch aswell as a upgraded BCM. I understand that Kufatec offer a adapter loom to go between the halogen plug in the existing wiring loom to the Xenon socket in the xenon headlight unit. I understand...

Anyone got the installation doc for the Kufatec tailgate loom? The pdf on their site is limited to 8 pages and requires login creds to access full guide. I purchased mine through Tunning fanatics DE but don't seem to have received the Kufatec site login details. Have mailed them but was hoping...

Along the head lining and down the b pillar. You’ll need to extend the CAN wires as the loom is for RHD. The headlining is not glued, I doubt you’d need to remove it

Folks, am I right in thinking the Kufatec retrofit loom for OEM tailgate runs down the headlining and A/B post? And if so is the headlining in a Caravelle glued to the roof?

...to fix to the airbag harness. I found this on eBay but no idea if it’s what necessary when fitting mfsw...

Use ADVANCED MEASURING VALUES in 03 ABS with VCDS. See below. https://www.t6forum.com/threads/side-assist-or-blind-spot-detection-rear-cross-traffic-alert-retrofit.14590/post-262706...