Search results for query: Cable route

My camera is located at the bottom of rear window centre and above wiper motor. Perfect then cable threaded inside tail gate to rubber gaitor.

Sorry to barge in on this one. Been really useful reading about the cable routing from front to back and getting it through the rubber gaiter etc. I've purchased a camera that physically replaces the nearside number plate housing so I need to get access to the back of the number plate...

Sorry I meant the victron orion-tr smart...just getting to grips with the correct terminology. But if the orion xs is the best for charging the roamer battery then I'd easy go down that route. Thanks for that

That’s fine. If you put the Ablemail by the DC-DC you won’t need much at all. 1m red,1m black should be fine. You don’t need to run a cable back to the SB, you just intercept the one that come from the SB to the DC-DC near the DC-DC.

Something like this do the trick for Single-Core PVC Auto Cable 17.5amp 2mm? How much will I need? If I were to add the SB would I just need more of the same cable to route through to the SB? What connector types do I need? Thank you all

Thanks. I had the wires from the AMT going directly into the Orion originally but the black plastic cover didn’t like the extra wires being there and didn’t close right so I changed it. The earth will go to the earth busbar. It’s arriving soon. I’ve ordered that fused charger wire and will...

Looking better. Personally I wired the AMT differently and just went direct to the Orion as per the instructions. Less cable and connections. You could certainly do that with the neg to save routing that to the chassis. You don’t need the fused cable for the ip65 now as the one you have fitted...

Thanks. I have sorted my mistakes. The only cable going to LB positive is the thickest red one coming from my mega fuse now. I’ve taken the Orion output to the mega slot on the busbar as it’s not getting used and will order another 60a fuse for this. I’ve got all my 12v fuses for everything...

No, that means the main fuse and isolator are meaningless if you do this. Connect the main single positive cable to the positive terminal on the battery. There should only be this single connection on the battery. Then the shortest run possible to the main Megafuse - shortest as this cable is...

Excellent thanks, that's fine connected now and working fine

Never attach anything to the negative battery terminal. It will bypass the shunt and the van will not see the discharge so it will not recharge it. It's a surefire way to give yourself endless electrical issues and killing the starter battery.

Can you show a picture of how you earthed it please, as I presume like most of the ecoflow videos it not a good idea to use the negative battery terminal to fix the earth cable (black) once routed?

As a suggestion, when you do find a route through front to back pull in some additional live singles and possibly a blue 3 core arctic flex 1.5 or 2.5 mm2 if you want a 230 hook up fed skt next to the drivers seat. On my Redline conversion the only original leisure wiring I kept was the feed to...

Ok, next thing - build quality. We've all seen some bad examples of T6 build quality coming from convertors, and motorhomes are no different. The additional complexity of more stuff on board adds to that, and it's also likely that a new motorhome will have cost more, so expectations are higher...

Nice set up here putting it under the seats. Good to take full advantage of space under passenger bench seat as well. I reckon I'll be going for the same sort of set up in my T6. I just have a few questions: 1/ Fuse box for circuits from leisure battery Are you putting all fuses under the...

Forget the solar for now. As I said earlier today and Roadtripper is also saying the issue is likely the feed from the LB to the back of the van. If that isn’t working correctly you will get the 2 symptoms you have (no hab and odd solar). Check that cable for continuity using your multimeter...

Thank you, I’ve disconnected panels for now. I have left all panels in cupboards accessible to try and understand problem. I have ordered some chunky auto electrical wire to see if I can temporarily wire positive if mppt to LB and see if that is stable. If so I may need to consider routing a...

What is the CBE circular component those spade connectors are attached to? What is the routing of the cables from the MPPT to the LB? It looks almost certainly like a wiring issue.

Panels connect through a hole in pop top and routed to ‘wardrobe’. I followed the step by step on the install and was very happy to use spade piggy backs rather than try and route a wire all through van to leisure battery. I will leave all disconnected until I can get some proper pictures of...

Thanks, yes the panel is just connected with hidden clips.