Search results for query: spacers

It could just be the angle of the pics, but you seem to have quite a bit of poke going on there - are you running with spacers?

Here is the post I recalled… Maybe give CRS in Cannock a call to find out if there is a weight limit etc.

Photo to confirm what @manfrotto said. Don’t think the 12mm hub centrics I was looking at will work. Darkside Developments can make custom thickness spacers. Stu

Thanks. It does now have spacers on the rear - 20mm

I'm sure mine are from here....they were supplied by @The Van Cave https://www.pcdparts.co.uk/products/wheel-spacers/hubcentric-wheel-spacers/

Must be .....get a wheel off check i would buddy

I’ve ran spacers front and rear with no issues, just need a 15mm rear with the Navis wheels. That tool looks handy, order placed! PS you don’t need to run spacers the Navis wheels fit fine but a 15mm rear improves the look IMO

To keep the overall look similar front and back a 10 or 15mm spacer on the rear is ideal.

And there's enough depth for the wheel bolts to grip safely on the 21mm ones?

looks great!

I run same wheels on my camper but with 265.40 to give bit of rim protection of our lovely uk roads

Hi @N13LRO they are koni special active shocks with I think 40mm lowering springs which @CRS Performance supplied, I'm also running spacers/adapters 21mm front and 25mm rear, which are h&r :thumbsup:

Hi the wheels fitted straight on as they come. I've since had it lowered and it looks fine without spacers. The mechanic said I possibly could add spacers but it looks fine as is.

Finally found some time to throw'm on. Rear has 15mm spacers, tried 5mm in the front but to keep everything 'balanced' went with no spacers in the front. The rear sits the same front and rear now. Could also work with 20mm+5mm or 25mm+10mm spacers. But the sliding door is the main cullprit...

Hi all, I have a set of great condition 30mm H&R wheel spacers that I dont intend to use. £100 posted to anyone on this forum. Or collection from Southampton area. Mike.

I was looking at the same issue and measured the spigot protrusion - it is around 12mm. I also checked the wheels I was wanting to use and they have a chamfered inner edge of around 6-8mm, so therefore once even thin spacers mean the wheels will not be supported by the spigot.

Wheels: RC-Design RC25T, 7,0Jx17 ET55, Hofmann steel wheel spacers 15 mm each Tyres: Falken Wildpeak A/T AT3WA 235/65R17 Suspension: Stock

Hi Stu Very few people who sell B14 kits realise that there are limitations with these kits , and the weight they can carry . spring spacers on the rear wont help or fit because the issue you have isnt actually the height its the spring not coping with the weight and we dont...

The 21mm H&R spacers on EBay seem to be ok for a T6.1 When I put the details in to see if they fitted my 2022 Caravelle T6.1 4motion they came up as suitable for my vehicle. Link below: https://www.ebay.co.uk/itm/175672738038

STL’s fitted. After much deliberation I went with 245/45/20 Mich CC2’s & a 15mm Rear Spacer. Well happy with the outcome! :)