Search results for query: spacers

Sounds like will need spacers to use sportline wheels then, good looking set up

I notice @Bigpikle and @racT6bus are running 235 65 profile AS tyres. Can I ask if either of you are running spacers on the rear? I'm running 15mm spacers with a 225 tyre and am uncertain if the 235 will clash with the sliding door with the spacers fitted. I currently have approximately 10mm...

...General Grabber AT3 to their T6. I have 235/65 just fitted on my newly powder coated 16” steels. (T30) Trying to decide on the right size spacers I’ve measured down from the wheel arch and it’s looking like 15mm on the front and 20mm on the rear. Does this sound right? I’m not looking to...

Will look into that, thank you.

I haven't got spacers but was told that 10mm would be best for my set up to ensure it definitely doesn't clash with the sliding door. I'll be getting it done but not for a while, just trying to recover from the recent mechanical expenses!

...and rear wheels to look the same. At 7j et 56, Devonports are relatively narrow and have a large offset. You'd get away with a much thicker spacer without risking illegal tyre poke. There are members on the forum with 20, 25 and 30mm rear spacers on their Devonports who don't report any...

My camper weighs in at 2.4t and the Watfield 15mm spacers at the rear have coped without issue.

Can anyone share the thickness of the spacer and diameter of the bolts? Cheers

Hi all, Does anyone have any 15mm or 20mm spacers they are looking move on? I want to look to space my canteras out a bit and looking for 20mm rear and 15mm front. Cheers. Mike

look lovely with some spacers - if I wasn't going for other alloys i'd snap them up. GLWS.

Hiya hoping someone knows.. I’ve had a chat with Bilstein themselves … im running 20’s , B14’s… fronts are as high as it will go…it sits lower as its t32… bilstein say theres a spacer for front strut top you can pop in or change springs… i’ve run like this a while and my wheel offsets are spot...

So you will have to go for these 25mm spacers then?:

Are you running different offsets front and rear?

We've not got any pics to hand, but the wheels can look a bit lost when lowered as they seat so tucked in the wheel arches, however a set of spacers sort that no problem

You'll need spacers or different wheels that fit in this case.

+1 for standard Devonport with 235/65/17 falken wildpeak. No spacers standard suspension

https://www.t6forum.com/threads/two-pairs-of-25mm-h-r-bolt-on-spacers.55243/

@Skyliner33 15mm on the front and 20mm spacers on the rear

What spacers did you end up running ? I’m running a similar set up but with 35mm lift

All completely standard and no spacers