Search results for query: centre bore

"I was stunned when they came back and said that tests had shown the Adblue used ‘was below spec’ and they couldn’t proceed as a warranty issue. The repair cost would be in the region of £2000! The service centre suggested I contact VW Commercial. I won’t go into the details other than to say I...

CB (Centre Bore) is 65.1 mm for all variants of >>T6<< and >>T6.1<<

Supermetal Cell 20” Gloss Black Alloy Wheels with Tyres Size: 20 x 9J Offset (ET): 45 Centre Bore: 65.1mm PCD: 5x120 Load Rating: 950kg Per Wheel (T32 Capable Wheel) Tyre Size - 275/40ZR20 106Y EXTRA LOAD Full set of bolts including locking nuts and key as pictured. Wheels in Excellent...

2 Navis Twin 5 alloys and tyres for Transporters. 9J ET42 Diameter : 20 Inch Bolt Pattern : 5×120 Fitment Only Centre Bore : 65.1 Load Rating 1050kg (per wheel) Complete with 275/35/20 tyres with approx 5.5mm. No punctures or repairs. Wheels have never been refurbed or kerbed. Wheels and...

...am a very cautious/courteous driver! Riveria RV120 gloss black alloys 275/35 tyres 20” x 10 5 x 120 40 Offset 900kg load rating 72.6 centre bore These are a set of non-staggered alloys. I have had the van lowered by about 60mm all round and there is no chance in rubbing on full lock. Feel...

...on all tyres, there is some sidewall damage on one (see pictures). Full spec: Size: 20 Inch Width: 8.5J Offset ET: +35mm PCD: 5x120 Centre Bore: 72.6mm (you'll need spigots) Max Load (per wheel): 875Kg They will need to be collected from Leeds (Yorkshire) as I don't have a palet. Any...

I ended up buy the genuine VW ones form Vanstyle for £120, they list Amarok fitment

...which again isn’t really visible unless close up. I’ve tried to capture these as best I can in the pictures. Size: 20x8J Offset (ET): 42 Centre Bore: 72.6mm PCD: 5x120 Load Rating: 880kg Per Wheel (T32 Capable Wheel) Tyres The tyres are Accelera Phi 255/45/20 101Y. These tyres have only...

If genuine Vw Dynamic centre caps are being bought for Canteras, then they are a little bit sloppy & will fall out if not glued / fixed into the bore. I've bought Sikaflex EBT+ in black to do the job I speak from experience... Although they do fit my winter set up with no problems on the 16"...

That's odd all I did was fill out the van reg number on the order form and the van model came up and they delivered them Sunday. No mention of needing anything else, they even supplied new bolts. I'm pretty sure it said somewhere they're guaranteed to fit. 50mm offset it's says one the box

PM Sent. Can collect tomorrow.

Thanks. I'm hoping it is number 1! As I'm 99% they are OEM

...a new thread, so apologies as this question isn't specifically around spacers but more spigots. Am I right in thinking OEM wheels (Springfield's in this example) don't need spigots. I fitted the wheels yesterday and the centre bore was very snug so I assume you don't but thought I'd better check.

You just need some regular VW steel wheel centre caps.... and the best man for that is @Radford1071s The centre bore is for fitment onto the the hub of the van :thumbsup: @DaveBowden74 above has just fitted some JBW steels

Hi folks - with regards to centre caps, it turns out I’ve just purchased a set of JBW wheels and I need centre caps... the centre bore diameter is measured at 72.6mm. Has anyone purchased Vw caps of this size, and if so, where from? Cheers!

...6AD o PCD: 5x120 o Nut/Bolt: o Thread size: M14x1.5 o Hex: 17 o Bolt: 35 o Torque: 160 o Diameter, width, offset (front and rear) and centre bore: o FRONT: o Diameter: 20” o Width: 9j o Offset: 42 o Centre bore: 65.1 o REAR: o Diameter: 20” o Width: 9j o Offset: 32 o Centre bore: 65.1 Pics...

NavisWheels.com

I believe it's 1000kg for the 9.5 20×9.5 5×120 ET42 Centre Bore 82.0 Load 1000kg https://papasmith.co.uk/shop/bbs-xa-satin-black-polished-face/ Great price for a lovely set of wheels!