Search results for query: glow plug light flashing

Hi .have had this fault for a few months now. When engine run from cold , glow plug light starts flashing and goes into limp mode. Won't rev past 2800 rpm. Van still drives OK. As soon as engine temp reaches approx 70 degrees I can clear fault and it doesn't return. If fault is cleared before...

What was the code in word 01 causing the glow plug light to flash? Did it crank over at all? If so, fuel pressure sensor could cause non start. Changed lots, but it will crank, just not fire. Could be starter motor or anything to do with terminal 50 trigger I.e. control relay or its associated...

Welcome to the forum. The search box in the top right corner is the easiest way to check if others have posted details of similar problems - and they have! https://www.t6forum.com/search/691586/?q=glow+plug+light+flashing&o=relevance I'm sure others will ask, as it often helps people to help...

Hi, I would love your advice. I have a 2012 T5 Transporter and have had the flashing glow plug and the engine light come on. The coolant pump B control circuit open code came up so mutual mechanic replaced the egr coolant pump. $1000 later both the engine light and flashing glow plug has...

Hey, I've got a 6.1 kombi 2022. Im trying to run a 12V feed from the fuse box to the rear by piggy backing. I've tried all the slots on the ACC row, and after a short time of being plugged in the glow plug light has started flashing, and then when i pull the key and turn it off the engine...

...on ( same year just different buttons for acc) Looking at this post, I gather I can’t just code the ACC in? Since changing the wheel I also have the glow plug light flashing and start-stop error but I imagine this to do with the new wheel? Many thanks joe Any help would be much appreciated

TRANSPORTER T32 LWB DIESEL 2.0 TDI BMT 150 Highline Kombi Van 4MOTION - 2017 94k miles Hello! I have a horrid sinking feeling that this is happening to my van…. While in Scotland we had recovery out and the diagnostics showed a P2279 fault. The other image shows a healthy sensor L and my...

HI, Today my Lady had a problem starting the engine. She left the company parking lot, drove up to the security barrier and turned off the engine. She left the keys in the ignition, opened the door and went to the security counter to return the keys from the office. At that time, the door was...

Hi Jimbob2, my glow plug lights flashing on and off aswell, management lights on, my vans only done 910miles, VW getting a call tomorrow

Hi, not sure whether this is the correct forum, sort of between this and engine problems. I have had the fuel temperature sensor conductor wear/break issue on my 2017 150 T6, confirmed by finding the broken conductor. Cured, or so I thought, by fitting a new connection plug (same as fuel...

Thanks for clarification - good to know that flashing coil light was triggered. Quite possible that the stuttering was caused by the fault. Unfortunately we don't know for sure how engine is supposed to handle sudden loss of data. Possibly changed to some kind of emergency operating mode...

Hi all, Have just joined the forum. I purchased my first T6 back in September 22 and unfortunately have had nothing but trouble with it but hoping to slowly work my way through the issues. I have sorted some issues (I have basic mechanical knowledge from an apprenticeship years ago) and my...

Hi, just had same fault with my t6, turned out to be broken wire on fuel line sensor, wire soldered back together, cleared fault and all OK now

The van is T6 , 2016 reg , 60,000 miles , engine is 102 ps ,code reader Autel / Auto link AL329 ,also the stop start appears to stop working when the light is flashing, hope someone can help thanks.

I have loss of power and engine management light on and coil light flashing so I knew it was probably the particular filter again. Had it blown out as vw Nottingham had my van for 6 weeks and couldn’t get me one! Hasn’t worked for more than two months as already I’m back with the same problem...

Hi, I had this same issue recently with the same fault code. My van has been in the garage for nearly a month as warranty company were arguing the toss of labour charge to repair was garage diagnosed as crankshaft sensor giving intermittant signals. They changed it and I have had the van back...

Greetings. I’ve recently had the orange coil light flash up on start and a stop start error. On checking I had the following errors: P064C00 - Glow Plug Control Module P172400 - Signal for starter lock, short to ground I cleared these a couple of times and would run fine and but now they are...

If you have the engine susceptible to EGR corrosion but have not yet suffered from high oil consumption then blanking the EGR will hopefully prevent any future issue needing very expensive engine overhauls or replacements. This does leave you with a non complaint engine with regard to the MOT...

...manifests itself as warning light, engine's internal tests must fail several times - thus clearing a fault also clears any accumulated internal fault history. It looks like engine doesn't see the conditions serious enough - otherwise it would turn on flashing coil light (glow plug light...

Thank you very much for the data package. (1) RPM during the test - commanded by the ECU (2) EGR valve position during the test - cycles from 0% (no recirculation) to -65% (max recirc at the test) (3) Intake air flow during the test The maximum is full flow (no recirculation). Minimum...