Search results for query: High oil level

  • Order by relevance
  1. W

    New steering rack

    Had my steering rack replaced week beginning 1st July. Over the last three weeks I’d noticed a noise from ( what I thought was ) the suspension. Windows shut, air con on, problem solved. I’d also paid about £60 because my oil level was apparently too high ?? Short journeys I was told. I can...
  2. burnsy79

    T6.1 Reduce Oil warning

    Is it an over pressure light that’s on or is it the “oil level too high”? Oil level too high does usually point to the sensor being overly sensitive and not taking the oil expansion in to account. Once you complete the process in the video you should cure it. It’s hard to tell you what to do...
  3. K

    Oil Analysis shows high levels of Iron

    No I haven't taken it any further but need to investigate further a few fault codes, one of which is egr related. However since changing the oil and having driven around 2k miles it has not used any significant amount of oil.
  4. tinctina

    Oil level too high warning… AGAIN

    For high oil level and something else
  5. burnsy79

    T6.1 Reduce Oil warning

    Can’t help with the radio stations, mine has always been ok for that. The forum may have a good thread though.
  6. G

    Flashing coil light start/stop error P164B

    Varied. Bought Carista and forced DPF regeneration, soot level got down low but wasn't that high to start with. That hasn't fixed it, coil light back on. Same fault code for oil pressure switch. Very frustrating
  7. D

    2017 204 oil consumption issues [Resolved]

    So what would you suggest? If I get a new engine, delete the EGR before it can do its damage?
  8. CarreraRSR

    2016 180PS Bi-TDi CFCA engine failure

    The aluminium at 55ppm is well above the 30ppm that Millers suggest is their 'critical' level. Oil changes and blanking asap highly recommended
  9. D

    T6.1 Reduce Oil warning

    Physically checked the dipstick before we left and it was below the max (albeit just!) the increase in volume is why we thought maybe it was the heat as the van hadn’t moved in a couple days and the temp hasn’t gone below 25 day or night. It’s still a touch over max today so just going to call...
  10. M

    A recurring oil issue on T6,1.

    Hi everyone I really need some advise as I’m clueless and just the designated driver of T6,1 2021, 2.0 TDI, 12k miles After several hundred miles of motorway driving (2hrs / 1hr break / 2hrs) a warning light came on: ‘Oil level too high: workshop!’ I left it overnight and dipstick indicates...
  11. Jet

    Regrets, have you had a few....or is it too few to mention...

    ...some time in to see how to manage or fix the problem, only then did I see the large amount of posts regarding DPF regeneration and high oil levels. My thoughts are that the van was probably only used for short journeys around town, the dealer selling the van probably did a minimum of checks...
  12. Alvaro.G

    DPF Regen Frequency / Issues / Force discussion.

    Hello!! After reading the entire thread about DPF issues, I still have some doubts. My vehicle is a T6 199hp DSG 4Motion, year 2019, with 90k miles. I monitor the regenerations with Carista and VAG DPF, and it performs them approximately every 300km. I don’t have any warning lights on or errors...
  13. Smarterzipoo

    T6.1 Cylinder 3 pressure fault?

    This is now throwing the MIL light so booked into Breeze on the 21st. Let’s see… also getting oil level too high message.
  14. Samro

    T6.1 BiTDI 204 power at higher ambient temperature

    Very thin oil will not fill "the gaps" like more viscous oil and can result in a lack of compression. (In old knackered engines, running thicker oil can bring up the compression in old worn engines.) The thin air at 1500m above sea level could also be a factor insofar that there is less oxygen...
  15. K

    Oil Analysis shows high levels of Iron

    After worrying my oil consumption was high on our 204 I sent a sample off to get tested. The key results were High soot at 2.4% Iron at 163ppm Molybdenum at 63ppm Boron at 21ppm However in the comments it was deemed that wear metals were satisfactory but the soot level is critical. Is the...
  16. L

    Regen frequency help!!

    Hoping somebody has some ideas… I have a transporter T6 high line 16 plate (euro 6) Recently had the air intake manifold replaced due to fault ‘30535 - Intake Manifold- Runner Position- Sensor/Switch- Circuit: Range/Performance’ It was really clogged up. Before replacing it, the regens were...
  17. Jet

    I'm in!!!

    ...out at 190k) Looking forward to studying the huge amount of information on here to help me make my choices! Already had a rude introduction to DPF Regeneration and high oil levels, only had it a week!!!! Hopefully it was just due to the previous operators error (it has very low miles at £2k)...
  18. H

    2016 180PS Bi-TDi CFCA engine failure

    I sent my oil sample off to Millers last week and received the results today, the soot level is high and high silicon and aluminium, the engine runs fine with no high oil consumption just over 1/2 litre in a year 11 k miles, Probably now at a critical point to take action before any real...
  19. M

    Regen frequency help!!

    hi there. you get anywhere with this? Mainly the regulator electrical fault?
Back
Top