offset

I've just noticed my carpet lining on the inside of my sliding door rubs against the side panel and wheel arch when opening. I tried adjusting the bottom 2x m8 spline bolts which helped a bit but still not quite enough. Is there anything else i can do? Thanks in advance

Hi all, any help is much appreciated. I'm looking for some new wheels and it's either a set of matt black or bronze. I'm really liking bronze with a white van. I've found these Riviera RV197 8x18" wheels but not sure if I'm better off with an ET35 or ET42 offset? This is all new to me. And...

Hi. New here, first time post and sorry if this is a lame post!! I’m currently looking at new alloys for our 2016 T6 transporter (T30). We’ve had her since new with 18” Springfield’s. They’re a bit tired and need a refurb, so was thinking now was a good time to upgrade as well as add a few...

Hi. I have got a Transporter T6 (T30), and what some nice 20" rims. I have tryed to read at the forum about which tyres and many say 255/40 or 275/35. But which width and ET should I choose? I have found some nice 9x20 with et30. Same rim excist in 10x20 with et40. I want same width of tyres...

Hi All, first time post so apologies if this has been raised already. Purchasing my first T6 and looking to lower it by 70mm and fit 20” rims. Does anyone have experience or an opinion on fitting front 20x9, ET35 and rear 20x10 ET42. Is this config likely to cause any issues i.e rubbing? Thanks

Inspired by @t6blo's GOJOS setup but wanting to not hit the MPG too much I am hoping to swap out my EXISTING 255/40/r20 for NEW 235/65/r16 on my T28 camper. Will They Fit checks out ending up with nearly the same diameter/circumference, hardly any gap loss and ride height change which is good...

Has anyone had the offset re-machined on a set of alloy wheels before? I presume wheel manufactures machine the offset after casting? Would it affect the load rating?

Hello looking for advice on wheel offset as I'm not clued up on this subject even though I've looked through this forum. I've seen wheels I like which are 18" 9j wide with 30mm offset, they offer tyres of 255/45. Will these stick out past arch? Also carry fair bit of weight being a works van...

Hi, Currently have Wolfrace Munichs: 18 inch, 8.5J, ET45. Tyres are 255/45/18. I'm lowered by 40mm. Sadly one too many kerb scrapes, thus looking to replace - looking at Alkatec Evo 1 - as can get at good price. Sticking with 18", 8.5J, however offset is 35 (come in either 45 or 35)...

Hello all, recently bought a T26, wanting to change to 18" alloys instead of standard 16", but seeing everyone on about offset, loadrating and all sorts of things any help would be appreciated

Hi,the door card on my electric sliding door,is rubbing against the top of the wheel arch.But it's only in the middle of the card that's rubbing not the whole length of door.Can anyone help with what I need to adjust to sort it please.

Hi All - Toying with changing wheels. Currently have 20" 9J Wheels , 275/40/20 tyres , van lowered 50mm (it's a camper). Quite like the look of Supermetal Cells but not sure if the ET45 will rub, anyone have similar or advise what max offset I could look at?

Hi guys, anyone know if a 55 offset on steel wheels will clear highline brakes?

Hey Guys, I wanted to know what you thought. I saw this youtube video: and thought these Fuel Vector 16" x 8" +20ET rims would look awesome on my van. I requested a quote from my local tyre dealership and they told me these rims wouldn't fit my vehicle because of the +20ET offset, and if I...

I just wanted to check if anyone else finds that they cannot fit a Loc8 door table alongside their Lv1 or Lv2 alloys (wider, 10J rear)? Mine rubs and I just want to be sure that's just a by-product of the wheel width and not me being some sort of muppet in how I've fitted it? I'm reliably...

Is the standard offset 45mm? I’m looking at some Supermetal Cell 18” wheels from Wheelbase. It’s says I can select my own offset, what would you recommend? They are 8.5J They come with 255/45 tyres.

Any one got a pic of these on a grey van Anyone bent any ? what is the quality like ? cheers

Hello, picked up a T32 a few weeks ago, come to change the brakes after having new tyres fitted and noticed that one of the 20" alloys fitted is different to the other 3 on the van. They're 8.5" all the way round and correctly load rated so that's the same, however one has an offset of 35 rather...

I know nothing about T6 vans…. I Bought a T6 T32 LWB camper conversion…. It came lowered with 30mm vw springs and 275/40/20 load rated tyres…… Issue is I want to put it in Coilovers (B14’s or SoLows) and still want to run 20’s that will hopefully Slightly Tuck up in to the Arches. So what’s the...

Will these be ok on a T30 - 275/40/19 - 9 offset?