reimo variotech 3000

So, the day finally came when I took delivery of my 2019 Highline 150 manual SWB in Mojave on Friday. Already had 2 nights away this weekend and absolutely love the van - especially the wider Reimo Variotech bed. Thanks to all on this forum for the support so far, be prepared for many more...

Just before lockdown I bought a T6 and had it converted….long story of parts shortages, variable fitters and being stuck in lockups while we were all at home. Well that was 3-4 years ago and we’ve had a blast in the van since it’s been finished. However now I have some little niggles I’d...

Hi, i am looking at converting my T6 and install a slideable bed, either the Reimo 3000 or California bed system. I need to know which is the best quality and what the restrictions are of each bed type. The differences i know so far are: 1. California 2 seats, Reimo 3, both have isofix. 2...

I’m selling this bed and mattress that we bought last December for our Kombi camper van. We had it in the van until about March but it’s been used about 7 or 8 times, we use the pop top more and it’s taking up quite a bit of space stored in the house! The bed fits either side of the van, the...

Evening all, Has anyone any experience fitting a double passenger seat swivel base into a T6 SWB which has the Reimo 3000 sliding rear seat/bed already installed? The sliding seat rails run up close to the nearside rear of the passenger seat base and the rear floor will also be raised up to the...

We are very disappointed with the rattling and squeaking of our Reimo Variotech 3000 full width bed when driving our T6 twin slider Kombi van. Has anyone got any ideas how to stop this?

Hello, so i wanted the Reimo vario 3000 but Im not willing to pay in excess 7-8k for it with flooring and storage. instead I have looked at the smart bed evo 2 rail system, anyone got pics of this or similar alternatives in a SWB and any pictures of the bed being forward on a SWB to show how...

Hi guys, looking to get a sliding bed installed in our upcoming T6 conversion - we've narrowed it down to either the Reimo Variotech or the VW Cali sliding bed. Does anyone have experience of both? I've managed to find and sit on an example of the Reimo which we liked and have also found an...

Hi all. We have variotech 3000 sliding seats ( bonded) but seatbelts often get jammed when you’re on a hill. Apparently this is a general fault with this seat ? Anyone had any experience with this problem ? Thanks

Just finalising planning on a new t6.1 fitout in Australia, and trying to confirm the difference in the seat heights of the Reimo and RIB sliding beds - the RIB is high, and i cannot fit unless the roof is up (im 192cm, 6.2") - there are hints the reimo sits lower, but i cannot get any actual...

Hi everyone, I was wondering whether anyone knows of a company manufacturing seat covers for a Remio Variotech 3000 bed? I had intended to get it reupholstered however funds for the conversion have now dried up and with 15 months old twins draining me of my cash, I can't really justify the cost...

Hi Guys looking for a bit of advice, Looking to put a bed (undecided at the minute) on rails for the flexibility. I've found a used set of caravelle rails but I'm unsure if it contains everything I need. Where are you guys getting your rails and what are the recommendations? I'm looking to be...

Hi all, My first post, apologies if it's in the wrong section! I'm currently planning our camper conversion and one thing we're really keen on having is a sliding seat bed in order to keep our two kids (3 and 6) within sweet passing distance while on longer drives but then also being able to...

Hi, we have 3 kids: 6, 4 and 6 months, so need decent kids high backed boosters and the baby a big seat. We’re planning to get a new t6 swb as everyday car (no commuting) and for getaways and holidays. Realise it’ll be a tight squeeze but mostly doing it for the convenience of having (almost)...

Hi all Am new to the forum here, but lurking a while over on some of the "other" forums :-) I've looking to fit solar charging to my Caravelle which has an existing split charge leisure system, running fridge and lights. Have read the What Solar Panel & Controller? thread which is a great...

I simply could not find any covers for these rails so I've 3D printed my own design, in sections because a) they can be removed individually to suit different seat positions b) my printer can't print bigger than 235mm long. They just clip into place, and the last one has a hole in it to help...

Hi, I had the cardio Trex bed installed on the rails and wanted to know if anybody had come up with a way to secure bikes into them or if there is anything available to buy ?

I’m after side unit options to fit a LWB with Reimo 1200 bed on rails. Evo Designs doesn’t allow enough space for a vanshades window blind behind the drivers seat. Magestics units don’t accept a top loading fridge and are too narrow for a cooker/sink. Any other suggestions?? These all seem...

Hi, we are progressing with our T6 panel van conversion and have reached the seat bed decision. we have two kids, 7years old and three years old. we would like 3 seats in the back to give us options but appreciate we won’t get three full adults back there as we are having kitchen units up the...

Has anyone found, or made a table that fits into the Reimo Variotech 3000 rails? I've seen the 'standard' table leg which fixes to the seat base and pivots out to make a big 'U' shaped leg for the table, but I'm not keen on this look. It seems to me that the floor rails could be used to fix...