Camper box DIY

gymon

Member
VIP Member
T6 Pro
Hey,
I’m planning to build a camper box for my car, and from what I’ve seen, most setups don’t sit on top of the plastic threshold at the back of the trunk. Is there a reason why people avoid doing that?
IMG_2153.jpeg
It would give me an extra 10 cm, which makes a big difference since I have the short version of the car. So I’d really like to make the most of the available space.

P.S. Not even sure if it’s called a “camper box” in English – feel free to correct me!
 
  • Like
Reactions: CAB
We built our own furniture for the van and chose to finish the cupboards before the threshold because of the shape of the rear doors .
 
Measure the gap again from inside with the door closed.

The rear threshold plastics can't take too much weight.
 
  • Like
Reactions: CAB
Yes it can ;D so I’m wondering if there is any reason to not use that space :)
IMG_0143.jpeg
 
Is there space vertically? The doors curve in as they go up.

I would keep the weight on the floor and put a cut-out over the threshold so it is just touching.
 
I'd keep that space without furniture but use it for other items, folding chairs or table, brollies, dog leads, coats, fire extinguisher, wet items etc - the list goes on.
 
In our Caravelle out kitchen pod does use some of the space, but that's because it's raised up on feet taking the main load.

A full camping pod will obviously be heavier but you could use the same strategy of having a couple of heavy duty planks for it to rest on but allowing it's "base" to overhang less load bearing trim?
 
Our tailgate has a little button on the inside panel for the door release, if you have this I would make it accessible if possible, but it’s definitely a space that shouldn’t be wasted, nothing that a bit of bungee cord can’t be used for so things don’t fall out when opening the doors
 
Back
Top