Changing bench with airbag to single

suntan46

New Member
Is it possible to change a shuttle double with airbag to single with airbag without doing any modifications.
 
Ok well if that’s the case is it not just a simple plug in the single seat to the plug where double seat would have been plugged into ?
 
@suntan46 can you check the plug to see if the same on double as the single and matches other end of plug coming out of floor.
Also if plug different then are there the same amount or same colour wires in plug,if that’s the case could you change the plug from your double and put it on the single so then plugs in to floor?
I’m probably stating the obvious here but you would think if both seats are airbags then it’s gotta be just a case of plugging in
 
I've done it, however I had to cut the connector off the double seat for the airbag as they did not match. Oh yes and neither did the wire colours completely however some searching on here found the answers. I will see if I can find my post as I am sure I did one.
 
Actually learnt how to use the search properly after all this time....

 
Actually learnt how to use the search properly after all this time....

Thanks for the help guys, will see what connector I have when the seat comes.
 
Back
Top