Drivers swivel and camper conversion

[Waumo]

My T6 SWB is converted as a camper and I have furniture behind the drivers seat, there is a very small gap between seat and furniture where I currently store the table. Does anybody know, If I was to put a swivel on the drivers seat (something like the RIB swivel from Kiravans) will it be able to turn 180 degs? has anybody managed this? In all the photos I see online the drivers seat is always only slightly turned. I know you are thinking this is pointless as there will be no room for your legs when sitting at the seat rotated but I am looking at the cabbunk bed system and both passenger and drivers seats have to rotate 180 for it to be viable.

Cabbunk - Add TWO Extra Childbeds into YOUR Motorhome

Cabbunk - a new and inventive way to add two extra childbeds to your swivel seat motorhome. Fiat Ducato, Renault Master, New Ford Transit, Ford Transit Custom, VW T5, VW T6, Mercedes Vito, Mercedes Sprinter

www.cabbunk.co.uk

Thanks

 

[The Bear78]

I have Sportscraft swivels and can take a look at how much rear space they need to swivel if this would help?
I too was very interested in the Cabbunk system but obviously the bunk length is limited by the cab (not the advertised maximum) and would have soon been too short for my eldest.

 

[Waumo]

When you get chance that would be great if you could. From the seat base to the furniture I have 16cm to play with! I do need to measure the cab width, as well as find out how wide the beds are. I know the ‘slackness’ of the bunks is dictated by moving the seats back and forth on the sliders, but with a bench seat at the front it doesn’t move back and forth.