Sold H7s for spares or DRL repair, £50 collected (Stockport / Trafford Park)

[CAB]

A set of T6 H7s, for repair or for spares.

'E' revision, so needs the DRL holder replacing and wiring in, as per the thread:

H7 Headlamp - W21W DRL Bulb Issue. Be Aware

I'd been having an intermittent fault with the off side DRL for a while. As soon as I put my fingers on the bulb holder, it would turn back on for a short time. However, eventually it packed up altogether. So I removed it and discovered this.... The contacts were blackened and the plastic...

www.t6forum.com

The RHS needs the holder replacing; the LHS works but probably needs fixing, there was an intermittent 'bulb out' warning light before I took them out.

£50 collected (Stockport or Trafford Park); they are in separate (very large) boxes, if you want them posted I will do so at cost and get a price.

Various DRL bulbs available, an OEM on the LHS and a MARUTA on the RHS, with spares of the MARUTA and probably some LUMRO as well.


RHS
Some scratching on the lower part (not my doing, was like that when I bought them!). Never really bothered me. NO MAIN BULB COVER OR CLIP (see photo).

LHS
NO BULB COVER but the clip is in place.

 

[Sackmycook]

Bargain

 

[Paynewright]

I changed the bulb holders in mine before fitting as a pre-emptive measure while they were on the bench. Very easy to do with a soldering iron and some heatshrink or heatshrink crimp connectors. I posted some pics and a write up when I did mine.

You could pay £200 for a set that still need the bulb holders changing that the seller has not disclosed or is unaware.

I too think they are a bargain

 

[CAB]

I changed the bulb holders in mine before fitting as a pre-emptive measure while they were on the bench. Very easy to do with a soldering iron and some heatshrink or heatshrink crimp connectors. I posted some pics and a write up when I did mine.

You could pay £200 for a set that still need the bulb holders changing that the seller has not disclosed or is unaware.

I too think they are a bargain

Well outside of my skill set, otherwise I would have done it myself!

I'm sure it's easy enough for anyone handy with with a soldering iron.

 

[CAB]

Sold, pending me sorting delivery.