Heater cables through floor

[VanBlanc]

I need to pass the power and control cables from my heater through the floor beneath the drivers seat.

Before I dive in is there an existing hole I could use that the cables and connectors would pass through?

Otherwise it looks like the hole saw and a gaiter/boot.

 

[Rioja John]

In my T6.1 there was a grommet with wires already through and I just used that.

John.

 

[Higgidav]

In my T6.1 there was a grommet with wires already through and I just used that.

Same on the T6

 

[Pauly]

Yes theres a nice grommet in the right place

From above




From below

 

[Dellmassive]

The same gromet is on both sides.

 

[VanBlanc]

Thx chaps. That should do nicely even if have to take the plugs off and remake.

 

[oldiebut goodie]

I have already linked to the required grommet amongst my posts for oem heater install.

 

[drinfinity]

I used this same grommet, and opened a slot in it enough to force the heater power and control cables through without taking the plugs off.