Recently removed from my T6 but i assume will fit most if not all Tx variants.
Connectors to one headset damaged on removal, as below, this is the cables from the headrest down to the underseat. The connection point back to the AP1003 control module are OK as shown in 20230525_115223..jpg.
I'm investigating a replacement cable from the headrest, or an alternative way to wire it with a new connector setup. Happy to let them go for a little less if the buyer wants to correct this him/herself.
Any questions just ask, fully working on removal, just not getting the use out of them so they will be more use for another owner
£400 ono (willing to post)
- 2x replacement headrests in alcantara with Rosen AV7900 screens integrated, including built in DVD player
- 2x controllers for inbuilt games or control of screen interface
- 1x master remote
- 2x bluetooth headphones which can be independently synced to screen being used
- 1x AP1003 control module to supply power etc to screens - simply needs a ignition live feed from middle of the dash, was originally on a fused breakout of 2x7.5A fuses from SC31 location and ground to chassis.
Connectors to one headset damaged on removal, as below, this is the cables from the headrest down to the underseat. The connection point back to the AP1003 control module are OK as shown in 20230525_115223..jpg.
I'm investigating a replacement cable from the headrest, or an alternative way to wire it with a new connector setup. Happy to let them go for a little less if the buyer wants to correct this him/herself.
Any questions just ask, fully working on removal, just not getting the use out of them so they will be more use for another owner
£400 ono (willing to post)
Last edited:
