Power fold mirror retrofit +++

[gerry]

Hello everyone
following the readings on the forum I replaced the mirrors, the engines and the harnesses of the 2 doors
'thanks to the forum' has the mirror switch with folding the mirrors fold
I wonder if
in T17l 17-pin connector, black, on left A-pillar I don't miss wires
to fold the mirrors automatically when the doors close?
thank gerry

 

[gerry]

actually i'm looking for diagrams where there would have mentioned
the black connector T17I pillar A
the thread numbers 5,9,11,14 all white
If anyone has a solution

 

[Zolee]

Hello guys. I want to retrofit power folding mirrors on my T6, but I can’t access the door controls with my VCDS. Both doors show this error message.
Any ideas how can I access them.
Thx in advance!

 

[Deaky]

I don't think you’re accessing the correct modules. The mirrors are connected with the window motors. These are a sub module in 09 Central Electrics.

 

[gerry]

take a capture
09 electric central to see which electric window motors you have

Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 B HW: 7E0 937 090
Component: BCM PQ25 Max4 H81 0744
Revision: B9081001 Serial number: 0982 149160058
Coding: 7AA839B84A21209201280F746CEB8EF48FA0600F60CE6960320400230800
Shop #: WSC 02737 534 140351
VCID: 2A0D04711CF5A2EB2DF-807E

Subsystem 1 - Part No: 5K7 955 559 B Labels: 5K7-955-559.CLB
Component: RLS 250516 03 37 0059
Coding: 0228DD

Subsystem 2 - Part No SW: 7E0 959 801 N HW: 7E0 959 801 N Labels: 7E0-959-80X-V2.CLB
Component: J386__TSG_FT 004 0654
Serial number: KU0KU002051881221365
Coding: 0400A1

Subsystem 3 - Part No SW: 7E0 959 802 R HW: 7E0 959 802 R Labels: 7E0-959-80X-V2.CLB
Component: J387__TSG_BT 005 0654
Serial number: KU0KU027041881171826
Coding: 1400A1

 

[Zolee]

Hello. Here is the capture of my 9 central electric

 

[mmi]

Hello. Here is the capture of my 9 central electric

Please do the VCDS Auto.Scan, Save, and post the complete file here.

 

[Zolee]

Ok. Doing right now!

 

[Zolee]

Here is the auto scan file.

 

[mmi]

to retrofit power folding mirrors on my T6

Subsystem 2 - Part No SW: 7E0 959 801 M HW: 7E0 959 801 M
Component: J386__TSG_FT 004 0653
Serial number: KU0KU014021990453289
Coding: 0400A0

Subsystem 3 - Part No SW: 7E0 959 802 M HW: 7E0 959 802 M
Component: J387__TSG_BT 004 0653
Serial number: KU0KU020021990511328
Coding: 1400A0

I'm afraid you need to change your window controllers to units which support power folding - as your "M"-revisions (as above) do not.
E.g. these (R+Q revisions, or L+L revisions):

Subsystem 2 - Part No SW: 7E0 959 801 R HW: 7E0 959 801 R
Component: J386__TSG_FT 004 0653
Coding: 1400B1

Subsystem 3 - Part No SW: 7E0 959 802 Q HW: 7E0 959 802 Q Labels:
Component: J387__TSG_BT 003 0653
Coding: 0400A1

Or go for an aftermarket solution:

Retrofit: Power fold mirror with fold on remote lock

Great work there. I still haven't got round to doing mine. Although I bought mine in Nov 2017 it is a 2018 model and I have been told by VW my door modules won't manage the folding mirrors.

www.t6forum.com