Hello everyone!
I looking for answers for an installation of Radio RCD330 with reverse camera on my Transporter T5 from 2015. I know there are already forums and topics about it on T6 Forum and on other sites but I can't find a solution.
Last year, I had a VW Polo V 6R with the same screen and a camera. I installed on it and activate options on VCDS and evrything works normally.
This year, I changed Polo with a Transporter T5 from 2015. Good news, I can use my screen and a reverse camera on it.
The screen works perfectly excepts camera.
I bought a new camera on left door brake light : Left door brake light Reverse Camera
I installed on it with every recomandations :
I connected the video output (yellow cable) at the rear of the radio with the adapter. I have a delay Box connected with three wires : blue wire on +12V reverse light (cable green/black under the steering wheel), red wire connected to radio fuse with the "double fuse" cable and Black wire connected to the ground of the car. The other side of the delay box is connected to the camera power cable. There is +12V everywhere and I can ear the relay of the delay box when I engage reverse.
I changed on VCDS some options (Backup Camera installed, Rear view camera installed,...) :
I tried with "Camera de recul" (Backup camera) and "Automatique" (automatic) but same result.
I had OPS install before and when I engage reverse, I have the message "The "Rear view camera system" is currently not available." When I clicked on "Ok", I just have OPS working normally.
I tried everything on installation, VCDS. I ordered another camera : Second camera and nothing works.
If someone have an idea, please help me
Thanks!
(sorry for my bad english)
Steven
I looking for answers for an installation of Radio RCD330 with reverse camera on my Transporter T5 from 2015. I know there are already forums and topics about it on T6 Forum and on other sites but I can't find a solution.
Last year, I had a VW Polo V 6R with the same screen and a camera. I installed on it and activate options on VCDS and evrything works normally.
This year, I changed Polo with a Transporter T5 from 2015. Good news, I can use my screen and a reverse camera on it.
The screen works perfectly excepts camera.
I bought a new camera on left door brake light : Left door brake light Reverse Camera
I installed on it with every recomandations :
I connected the video output (yellow cable) at the rear of the radio with the adapter. I have a delay Box connected with three wires : blue wire on +12V reverse light (cable green/black under the steering wheel), red wire connected to radio fuse with the "double fuse" cable and Black wire connected to the ground of the car. The other side of the delay box is connected to the camera power cable. There is +12V everywhere and I can ear the relay of the delay box when I engage reverse.
I changed on VCDS some options (Backup Camera installed, Rear view camera installed,...) :
I tried with "Camera de recul" (Backup camera) and "Automatique" (automatic) but same result.
I had OPS install before and when I engage reverse, I have the message "The "Rear view camera system" is currently not available." When I clicked on "Ok", I just have OPS working normally.
I tried everything on installation, VCDS. I ordered another camera : Second camera and nothing works.
If someone have an idea, please help me
Thanks!
(sorry for my bad english)
Steven
