Reimo Variotech 3000 bed rattling

That’s not right, the lever should be all the way down & the bolt should be at the top of the slot. Note the foam packing that our converter fitted to reduce the rattling.View attachment 171665
View attachment 171667
The brakes are adjusted by slacking off the lock nuts & winding the screws out using an Allen key, then tightening the lock nuts. What can happen, is that the mushroom shaped cam can come unscrewed from the bottom of the operating rod. If this happens, roll the bed to the slot in the rails, lift the bed so the runner is clear of the rail & replace the cam onto the bottom of the operating rod. This happened to me & I put a dab of loctite on the retaining screw.
View attachment 171666
View attachment 171664
Thanks for this, I am having annoying noise and I am checking out the brakes. When you say loosen off
That’s not right, the lever should be all the way down & the bolt should be at the top of the slot. Note the foam packing that our converter fitted to reduce the rattling.View attachment 171665
View attachment 171667
The brakes are adjusted by slacking off the lock nuts & winding the screws out using an Allen key, then tightening the lock nuts. What can happen, is that the mushroom shaped cam can come unscrewed from the bottom of the operating rod. If this happens, roll the bed to the slot in the rails, lift the bed so the runner is clear of the rail & replace the cam onto the bottom of the operating rod. This happened to me & I put a dab of loctite on the retaining screw.
View attachment 171666
View attachment 171664
thank you for this, mine only locks when both of the locks are engaged. Do you know if this is correct or should it only move if both are lifted. When you say about slacking off the nuts before loosening the Allen key part, which nuts are you referring to? I want to make sure mine are correct and tight. Thank you in advance.
 
Thanks guys I came across this while searching for something else; my 3000 rattles intermittently, so ill try these tips. The other thing I was looking into is if my van and reimo 3000 can be used to secure a wheelchair. is there any after-market attachments that can provide an anchor point? a family member has taken in ill and is wheelchair-bound bound so it would be great to be able to offer safe transport in the camper when the bed is removed or positioned forward.
 
Back
Top