For awareness, they’re T32 fitment.
I’ve just replied to someone who raised the same thing….
Good question!
Mine definitely is a T30 and these came off it. They were put on at 9000miles by the conversion company before I bought it…came off at 14000miles when I changed back to standard ride height (I’ve gone swamper).
But when I went on the Stance website to get the description the SPC095 that these are stamped as says for T32 (SPC094 are for T30).
Left me a bit confused so I made sure to advertise with the full description.
So you saying these look like for a T32 does make sense.
May be a daft question but my v5 does say mine is a T30…so either that’s not right and mine is a T32 or the conversion company put the wrong kit on originally!?!?
As far as I’m aware the T30 Stance kit is the same as a T28. So if they came of your T30 they should fit my T28 unless they were wrong for your vehicle. Stance Kit list a completely different kit stating only for T32 on there website. I have to compare the kits and see what the difference is.
If you have a Shuttle they often came with T32 struts because of the weight of possibly 9 adults in the Van ?? could this be the case ??
The difference is that giant bracket at the bottom of the front shocks. They simply won’t fit in anything but a T32 front hub. There’s a chance that due to the conversion, the company updated the front hubs to fit the T32 brakes to take the weight of the conversion… but there’s other things that they should have done as well…
There are instances of T30’s coming from the factory with T32 suspension. People only find out when they come to change something.
These are definitely T32 fitment assuming that is a pic of your kit and not a stock pic.
The difference being the T32 strut bolts in where as the T30 kit slides in and uses pinch bolts.
This is the T30 kit. You can see the difference on the front struts.
These are definitely T32 fitment assuming that is a pic of your kit and not a stock pic.
The difference being the T32 strut bolts in where as the T30 kit slides in and uses pinch bolts.
This is the T30 kit. You can see the difference on the front struts.
Stance Street Coilovers Suspension Kit VW Transporter T6 T6.1 (7H) (2015-) T26 T28 T30
Stance+ Street Coilovers Stance+ Part Code: SPC02094Transporter T6 T6.1 2.0, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDiT26/T28/T30. 2WD & 4WD Models. Excluding T32 Also fits T6.1 2020 onwardsYears: 2015-Present [70X/D] Front Lowering: 30-95mm Rear Lowering: 30-80mm Front Max Axle Weight...
www.stanceduk.com
