Trim between cab floor and cargo floor

[alangiff3]

Hi all

Any ideas on what I can use to trim the join between the rubber cab mat and the ply floor with vinyl in the camper part of the van?

Thanks

 

[DXX]

Aluminium strip or angle, screwed or bonded to the rear floor. Plenty of options online.

 

[Pete C]

I used normal flooring joining strip.

Pete

 

[Ads_Essex]

I was in the same position, until I cut strips of Dodo and placed that near the join, which allowed the rubber mat to overlay the ply and not get trodden down. Looks better than a strip, in my view.

Looking For Aluminium Trim For Front Edge Of Floor

Basically like the strip in this pic. Any ideas especially with links appreciated.

www.t6forum.com

 

[alangiff3]

Thanks all

 

[xpfloyd]

I used an aluminum floor strip. Can just about be seen at the bottom of this photo

50423528892_011cc7a1d1_o by VW T6, on Flickr