Upgrading T6 to T6.1 halogen tail lights (barn-doors)

SteBliss

Member
Can’t find a barn door specific thread on this,

Is a T6 oem halogen tail lamp swap to T6.1 oem halogen (barn door) tail lamp a straight swap?

I believe on the Tailgate version a pin swap is required, but I’m not sure about the barn door version as they use a different style connector.

Anyone done this before can shed some light my way?

Thanks in advance
 
Have a look here...





...





.
 
Can’t find a barn door specific thread on this,

Is a T6 oem halogen tail lamp swap to T6.1 oem halogen (barn door) tail lamp a straight swap?

I believe on the Tailgate version a pin swap is required, but I’m not sure about the barn door version as they use a different style connector.

Anyone done this before can shed some light my way?

Thanks in advance
@Adams done it with his T5.1, which uses the same config as the T6 -
Just fitted the new T6.1 rear lights..

fit is a direct swap, just requires a few pin changes

Pin assignment is
1 - brake
2 - Ground
3 - Side light
4 - Fog
5 - Indicator
6 - Reverse

pin assignment is the same on both sides

part no
7LA 945 095 D Nearside
7LA 945 096 D Offside
 
Back
Top