Sold Used Bilstein B14 T32 Kit. £500

Status
Not open for further replies.

Montecha

Senior Member
VCDS User
VIP Member
T6 Guru
As my van‘s become more of a Camper, I’ve found I need a higher ride height, so I’ve just taken the Bilstein B14 kit off.

The kit is for a T32, it’s 3 years old, probably about 25k miles - not much of that in the last 18 months. My van was a Kombi daily driver, so not carried load at all.

The kit works best with Panel/Kombi vans if you want the full height range (40-70mm drop), heavier Camper vans seem to sit lower. With my Camper set up I ended up 380 mm (F) and 380 mm (R) from hub centre to wheelarch.

£500 ono

Located at RG9 (Henley)

Thanks
Jamie

E7005E04-4A78-4887-8F8E-31648B3B401C.jpeg
 
Last edited:
Picture added includes the two C spanners that are not shown.

Was all good when it was taken off no knocking no leaks etc.
 
Last edited:
Mine went very quickly on one of the Facebook T5 pages.
If you or someone you know is on Facebook its worth a punt.
 
Back up For Sale, as sadly the deal fell through last minute.

As my van‘s become more of a Camper, I’ve found I need a higher ride height, so I’ve just taken the Bilstein B14 kit off.

The kit is for a T32, it’s 3 years old, probably about 25k miles - not much of that in the last 18 months. My van was a Kombi daily driver, so not carried load at all.

The kit works best with Panel/Kombi vans if you want the full height range (40-70mm drop), heavier Camper vans seem to sit lower. With my Camper set up I ended up 380 mm (F) and 380 mm (R), from hub centre to wheel arch.

£400 ono, collected. Located at RG9 (Henley)

(I can pack and drop with a courier but buyer will need to cover cost)



Thanks
Jamie

7BA61700-7561-4EAD-9250-A55B97E7BD5C.jpeg

F721AC5E-E60A-4263-A8BC-2DC778036E00.jpeg

7E9661A5-76A3-413B-A32B-E707B274018A.jpeg
 
Status
Not open for further replies.
Back
Top