Search results for query: flat bottom

Looking for a slimline low level kitchen for my T6.1 swb. I have a fabworx sliding rail bed and have approx. 300mm from the bottom which is narrower than the flat packs I’ve seen available. Just wondered if there’s any cabinet makers local to Chesterfield?

Hi, Flat bottom gloss black trim steering wheel, with dsg paddles, plug and play fitment on the T6, red button illumination. With airbag. Excellent condition (see pics), removed from my T6 due to it going up for sale. £400 collected.

...plug into your black surround and buttons - - remove the whole of the black trim c/w buttons off old wheel and fit directly onto the flat bottom wheel - suggest having a warm wheel/trim and take it easy with trim tools - be careful when pulling the black trims of each wheel - wiring is tight...

Thanks mmi, what wheels would you suggest that I look out for that are flat bottom?

I'll place on charge and increase the absorb voltage to 14.2V tonight and take a screenshot of the delta at when at 14.2 Volts. What I was was finding before my latest experiment was that the Delta was impossible to reduce with an absorb of 13.8V. I was finding that cell 3 would get to 3.45V...

Did you get to the bottom of your issue . i have the same issue with mine but not sure what it is Any help greatly appreciated

The lack of a 6th is not a handicap per se - top gear on the 5 speed box (0.756) is an almost identical ratio to top gear on the 6 cog unit (0.738). You're not getting an extra gear at the top. You're getting much the same bottom and top, but the ones in between have their ratios closer...

I’m after a flat bottom steering wheel, £110 bargin I’m off to make him an offer :slow rofl:

Had a nightmare putting the Vango Faros 3 up, never used an awning before. There are some hair band style loops at the bottom of the tent. Am I supposed to peg all these down as well as the more sturdy plastic ratchet thing? All the hairband stretchy loops are near the doors. Also, how...

We have one of these kettles. It boils much faster than a standard flat bottom one. Ridge Monkey. Get the biggest you can. We have a cadac safari chef but I would probably get one of the new cook 2 pro 3 if buying again. We have a couple of red robes that we carry in quite small stuff...

Hello all, I bought my T6 with a flat bottom multifunction steering wheel installed but the buttons don't work. The guy I bought it off said the wiring was done and just needed coding. However there are a couple of things he may not have been 100% telling the truth about. What is the easiest...

Evening all, For sale: T6 Highline MF steering wheel removed from my van at around 15k (probably less) when i swapped to a Golf flat bottom steering wheel. I swapped out the MF buttons to my new wheel so but the Golf buttons will be included with the wheel. The wheels in in great condition...

Does flat bottom steering wheel with DSG paddles exist from the factory for T6? Was told that Mk7 golf r line wont work with ACC.

Followed your write up today......took about 2hrs to remove the golf mk7 buttons off the flat bottom mfsw and do the same to my t6 round mfsw......its a M12 spline to remove my wheel, reattached my buttons from my t6 round wheel on to the flat bottom wheel with dsg paddle, refitted, works...

You don’t want to balance at the bottom curve, neither anywhere in the flat. The bottom it’s only valid for LVD. You want TOP balance as that’s where the bms balances and that’s where you cycle the most, the top. The reason you haven’t finished balancing the cell 3, is you got stack at 13.8v...

If you want the ground sheet totally flat then you have to set it up all totally perpendicular. Alternatively, pitch it then crawl around inside smoothly out the creases then repeg the corner to hold it. This is my setup now. If I wanted to sort it out totally I could move the lower peg point on...

Likewise,.I had a black one with ridges on it and had the same issue. Defo go for a flat protecter.

The ones I originally fitted were a good fit on the rear bumper (screw fixings). You need to trim the front ones so they don’t catch the bottom of the doors

I’ve got the Passat flat bottom one think they are the same as the golf ones also with flappy paddles cost me about £125

Hi. Nope just a cheap solution to swap out the existing mfsw for a flat bottom one