Search results for query: zinc

...used (where necessary) to prevent spring dislocation when car is jacked up. § Built in Elastomer bump stops for durability. § Dual locking rings (most applications) anodised for weather protection. § Zinc Plated Anti-Corrosion Coilover Bodies. § Shortened drop links supplied where needed

...punched the locations to drill, staring with a pilot hole before using a 5mm drill bit. I cleaned as much swarf out as I could, and applied some zinc anti-rust paint to the holes. Once that was dry, I applied some sealing adhesive stuff (that I had lying around) before riveting the hinge...

...the carpet. If you have a used van with ply lining I would suggest treating any holes that have been drilled for screws to be installed with zinc or red oxide paint and filling any holes in the floor with a little bit of polymer adhesive or similar to avoid future rust problems. You will...

...Fully insulated throughout Deep pile, extra soft anthracite carpet lined Extended rear panels Alcantara roof upgrade LED flush-fitting zinc finished roof lights, touch activated lights in the tailgate Deep pile, semi fitted cab mats Centre console upgrade in piano black and chrome 100%...

Just what I’ve been waiting for.

Hi, any chance you could let me know the exact Osmo oil you used please ? Quite a few options and different sheens.

We have the same interior less the extra drawer. We also went for the Sequoia table plus I recently added a Lagun swivel table also. If you’re keeping the double front seat I recommend fitting the folding hinge at some point. I fitted a board inside the back of the seat so you can sit or stand...

...it up mid-March. The advice I'd give here is that the lead times are all very loose, we upgraded our cushions from the standard to the Chenille Zinc, and were told that might take up some extra time. We did make the mistake of staying we weren't in a rush though- so that might have counted...

...with the modified plastic moulding. The welded on nuts on the tow bar mounting plates had to be cut off. The bare metal was then primed with zinc primer, and painted with smoothrite. The tow bar refitted with the Cate adaptors. Both Cate adaptors fitted either side of the tow bar. The...

...substrate materials are timber, metals, particularly aluminium (incl. anodized components), sheet steel (incl. phosphated, chromated and zinc plated components), metal primers and paint coatings (2-c systems), ceramic materials and plastics. Avaliable colours: Black White SikaFlex 521...

...very surprised to read that the PVWI inspection wasn't conclusive enough, because my report pretty much stated that the spots on mine are due to zinc inclusion, end of. Also, I have side bars, and whacking great 19" banded steels, all obvious on the PVWI report, and excepted as a warranty...

When the floor was removed I painted the screw holes with a zinc rich primer then filled, primed and sprayed the holes so there was no sign that they had been there. I did this on the walls too, the holes left on the sliding door and rear doors would be seen otherwise, even with reflex silver I...

...the van up, drilled holes to mark the corner radii then cut the panels out with a jigsaw, filed the burrs clean and primed the raw edges with zinc paint and finally with primer and lacquer. The rubber edge trim was applied then it was off to re read the window bonding instructions. Once the...