Search results for query: centre bore

I'm not sure if that's an issue but Centre bore on these 16" wheels are 70.1mm but T6 requires 65.1mmm

A flatter profile allows the wheel to have a deeper centre bore, thereby giving more calliper clearance. As seen on the 9, again with ET40 In case you hadn't guessed, i have 9 and 9.5 on mine Edit: good illustration of 9.5 concavity

The stud dimensions should be 5 X 120 with a centre bore of 65.1 for a T6 / T5 hub.

if you find where to tap it off, please let me know!:cool:

Hi Daniel. They will fit the vast majority of T6s just fine. The 38mm offset on the 10” wide rear might only be a problem on really low vans, or a Caravelle or similar which has a thicker door card which can rub when you open the sliding door. For those vans Velare also do a 45mm offset on a...

Landrover wheels have the same PCD, but have larger centre bores so will need spigot rings. This place has lots of info, List of car vendors and makes. Wheel fitment and tire size guide and knowledge base.

Thanks for the idea. I am that bored at the moment that I'm reading these long threads all the way back.... I would imagine the LED is fed from a BCM output, so you could tap off the feed there, rather than ll the way from the driver's door. It probably needs an LED in the centre of the dash too...

...alloys, with tires for sale. Specification: Size: 20 Inch Width: 8.5J & 10J Offset ET: +35mm & +38mm Concave: 40mm & 60mm PCD: 5x120 Centre Bore: 72.6mm (72.6 - 65.1 spigots included) Max Load (per wheel): 875Kg All tires have plenty of tread left. They aren't perfect - hence the price...

Here they are - Navis Twin-5 Wheel Specifications: Diameter : 20 Inch Bolt Pattern : 5×120 Fitment Only Width : 9J Offset : ET42 Centre Bore: 65.1 Colour : Gloss silver Style : Multispoke Load Rating 1050kg per wheel

What we have here is another example of someone who spends too much time sifting through selling sites. 9 full sets of centre caps in the 2 styles you see in the pictures (slots or holes) These are all off 2017 T6s and all in great condition. £20 a set including postage. See eBay for just...

The spigots on these wheels are a bit odd. The centre bore is 84mm with a large metal spigot ring that takes it down to 65mm. Apparently Wolfrace stopped making the 72mm version and started producing the massive rings to go with the 84mm version.

Thanks, but I don't have a welder or lathe. I've had a closer look tonight and couldn't see any remnant of drill bit left in so didn't grind it flat as I'd originally planned. I'll have one more go at drilling when the new bits arrive and after that I'll just have to take it somewhere.

Tiguan wheels are 5x112 so won’t fit a Transporter, which is 5x120. The Transporter centre-bore is 65.1 mm - bigger than the Tiguan. Make sure whichever wheels you find are load-rated to match your axle weights (ie: T28 has an axle load of 1600kg, so the wheel has to be rated to carry 800kg or...

...if that makes a difference when compared to a T28. Is the stock suspension different depending on the van payload? Would be nice to hear from anyone who has bought these wheels for a T28 and what they would advise Thanks Size: 20x8.5J Offset (ET): 45 Centre Bore: 65.1mm (Direct Fit) PCD: 5x120

B I’ve had similar experiences with titanium drill bits. It’s best to dull the cutting edge on a brand new cobalt drill when drilling soft material to avoid it ‘biting’, jamming and snapping. This can be done by using it on a relatively hard material for a short time. If there is a piece of...

...was going to fit them and run them as my daily's but not got round to fitting any tyres since the refurb. Size is as follows: 8.5x20 PCD 5x120 Centre Bore 65.1 These retail at around £1099, I'm looking for £900 I'll thought I'd see if there is any interest on here, before going on social...

...chrome surround, on the right) fits my Sportline wheels whereas the domed cap doesn’t, and feels like the tabs will snap if forced: Domed: Flat: The centre bore on the wheels measures 53.7mm. They’re the gloss black T6 wheels with a silver rim: Is there a difference in Sportline cap...

...attempt....just ask @Tourershine as even with a mallet he couldn't get them to budge. I ended up hitting them with a larger hammer, filing off the powder coat on the centre bore and copper slipping to make life easier. Devonports will fit all T6s, ET56 is fine and have 65.1 centre bore fitment

quick question and will save me removing one of my devonport wheels if possible what size is the hub centre hole on the t6 ? new replacement wheels front hub is 72.54 and rear are 74.10 just need to know what the oem hub size is to order spigot rings. have had a look online and the search...