Search results for query: centre bore

...out a load rating in those images, but you need to have a minimum load rating of 805kgs for the wheels. Bolt PCD needs to be 5 x 120. Centre bore needs to be a minimum of 65.1mm, but can be more if you use spigot rings. You need 101 load rated tyres as a minimum, and on an 8.5" wide rim, your...

...without spacers i would think; I run (as do many) ET45 on 9J so these would be 3mm further in, and you're running a slightly narrower tyre too. You'll need spigot rings to adapt the T6 hub to the centre bore of the x5 wheel Seen plenty of T5's on tiger claws, but don't think I've seen any T6's

Number 2. Call central VW van centre. They can tell you all the service history that was done at a VW garage. 0800 333 66 66 I did this when sleuthing my service history on my van.

Many thanks for the replies, yes the wheel was a nightmare to get off, though the tyre fitter did get it off with the rubber mallet, I thought they fitted all T6's.

Are they the same centre bore/pcd ??

...issue I had with banded steels after they where fitted was I couldn't get them back off!!! they were such a tight fit that only a large hammer could get them off. I did as @Tourershine mentioned, I checked the torque on the nuts every few days and I filed out the centre bore once I got them off.

...to be designed for the new range rover. Does anyone know whether they will fit my new T30. Everything looks OK but I am unsure of the centre bore fitment. In fact I am unsure about this in general as I have seen other wheels designed for both range rovers and Bentley's quoted OK for VW...

Lovely alloys , i love the momo's , they'd look lovely on my white T6, unfortunately money is tight at the moment. I am curious though as to what is the issue with the diamond cut alloys ? Thanks

I have my Sniper TV and DVD mounted in that location also. Gives another entertainment option, should the weather be bad. I am planning on hooking up my Anker or Bose Soundlink bluetooth speaker to the TV, and the speaker to the centre dashboard location.

...wheels I'm running are the concept versions and they have a couple of very minor tweaks to make to the Schmoov wheel, but that's only the centre bore being a little snug and the fact VW caps don't fit perfectly on these wheels yet, but these wheels do have the option of an old school domed...

...the driver's door closes easily and still sounds good. - Next job is to add Rial 18x 8.5 X10X black alloys (load rated for T32 and direct fit for Transporter centre bore) with all season tyres to complete the blacked out look. Loving the T6 forum, SOOO helpful. Can't wait to post some more...

Different centre bore and bolts, however, you can get a conversion kit with plastic spigot rings and stud/nuts. Had Range Rover sport alloys on the T5 with the fitting kit. Merseyspeed used to sell them.

I don’t know the centre bore size of those wheels, but you can get other OD size spigot rings with 65.1 ID. 73.1 and 74.1 as examples. Have a look on eBay, they’re usually only about a fiver a set. Have you got, or do you know anyone who has a vernier caliper that you could use to measure the CB...

...you tell me if the wheel pictured would fit a t6 Kombi t32 4 Motion its from a Landrover discovery I know the wheel is 5 x 120 and the centre bore is 72.6mm 8.5j x 20 with a offset of 53 its the offset I can't work out if it will fit or do you need to use a spacer with it also its weight...

...guys ! I'm looking for wheels for my t6. I found a set of four wheels from a Scirocco in my area. The probleme is: All T6s have a centre bore of 65.1mm, and these wheels are in 57.1mm. In the opposite way (65.1 wheels on 57.1mm vehicle), we can use spigot rings. But in that case, is...

They are available in various sizes, if you can't find the centre cap bore size on the manufacturers website just measure the width of the hole and Google around to see if you can find a suitable one

Are the centre bores the same as well?

I thought they were !. ( I sould not be lazy and google it ).

Have you got any close up pictures of them? id like to see them close up to see if I could be converted but I’m not sure I will be. o_O

I haven't bought from them but found that Tyreleader site has all the info on wheel load rating, offsets and centre bore. You can match up a set of tyres all in your package. I have seen good reports on them as a supplier. If anywhere near Leicester I'd have a word with Plush Automotive as they...