Search results for query: driveshaft

...drive on my t6 dsg 140hp t5 caac engine before Christmas :( Talked to the local well known workshop and booked a rapair for the “common?” Driveshaft and spline issue. They have put a new driveshaft and a new female spiderwheel in the diff. Still no drive according to the workshop, and they...

I've had the driveshaft strip the splines, and lost drive completely. My local garage has said the gearbox end needs addressed too, which is a job he recommends I find a specialist for. Has anybody on here recommendations for where I should approach? I'm based near Tewkesbury in West Midlands...

I'm swapping out my driveshaft... Again. I did use the genuine spline grease last time but I remember it was quite pricey from the dealer. Is it best to use the genuine stuff or can I use some moly or cv grease from Halfords or an auto parts store? I do have a LOT of copper grease but am I...

I am in the middle of changing my leaky shocks on our T6 T32 front suspension and I can't get the driveshaft to go back in on the engine side, it starts to locate but won't go in, I can get one bolt in at the bottom of the shock but the one above won't go in as the driveshaft won't go all the...

I'd be looking to recheck things there first

...the van,nothing before or after this speed range have had suspension tracking tyres and alloys etc checked all ok, I'm thinking either driveshaft or engine/ gearbox mount but local garages cannot confirm so currently stuck.has anyone had similar issue and rectified it or is there a garage in...

Yes, remove driveshaft to diagnose (1/2 hour job) Then, on any other transmission replace driveshaft and stub shaft, but on the DSG, remove and split the gearbox to replace the differential side gear, and of course replace the driveshaft.

My t32 is making a clicking type of noise when I steer one way.i think it could be a CV joint, driveshaft. Has anyone changed a driveshaft on one with a dsg box. Is it more involved than a manual box. Thanks

...morning when pulling away from a junction.... clunk and no drive. Just a grinding noise. Sounds very much like stripped splines on the driveshaft (remember the same issue from my earlier T5). My question is, has anyone got a list of part numbers for driveshafts? I am yet to get the van jacked...

Almost a year to the day since having my gearbox stripped and repaired due to the spider gear spline failure I have noticed a leak at the driveshaft seal for the drivers (longer) driveshaft. I will speak to the company that repaired the gearbox on Tuesday and hopefully they will sort it...

No difficulty at all. It can go back only one way if the three slider wheels ( or whatever the called) are lined up. However when the driveshaft was off. One of those wheels come off too. But I just put it back when I was refitting the driveshaft

...a wheel bearing then this too would show itself at all times, on or off the gas. I feel, based on other posts, the likely culprit is a driveshaft. Is it as simple as wheel off, driveshaft nut off, undo bottom ball joint, turn steering and undo inner flange bolts before wiggling it free...

I'm more concerned with putting extra load on the box /driveshafts with the weight of some of these wheels.

I'd be looking at driveshaft splines for a start

we have a 2022 6.1 , clicking ticking on acceleration was driveshafts, both replaced under warranty

So the AA report didn't pick up the driveshaft issue? I'd be going back to them.....

Seen the pictures today. DMF seized Driveshaft splines worn Gearbox needs replacing o_O TVS gearbox update = no warranty :cry::(:mad:

...loose drive with a horrid grinding noise on any T5, T5.1 T6 & T6.1 transporter, 5sp, 6 sp auto or DSG it's nearly always the offside driveshaft splines have worn out and stripped. The ONLY way to diagnose this, is to actually remove the driveshaft - a quick inspection is useless, and this...

Seems like the driveshafts are quite likely the issue... see this thread https://www.t6forum.com/threads/wobble-vibration-at-40-50mph-when-accelerating.43610/

Hi all, I may need new driveshafts soon, I have a 2017 204 4m DSG. Anyone managed to find any good aftermarket ones that are cheaper than genuine (which are £1500)?