Search results for query: cable under passenger seat

Hi, Sorry, this is doing my head in... I've got 2 amps to install: https://vault.alpine-usa.com/products/documents/OM_MRP-F200.PDF (T130 variant) Alpine MRP M500 - Amplifier Owner`s manual : Free Download, Borrow, and Streaming : Internet Archive (M450 variant) I want to run one power cable...

Finished fitting my 2000w inverter, Inc painting the mounting board, passenger seat out, battery out, 50mm² cables made up and 250a Megafuse added to my main fused busbar. All fits lovely, even with the factory swivelling seat Tested with a 500w heatgun I've been using for all my...

Progress on my audio upgrade… This will run from headunit quad lock to under seat to connect to Helix DSP. Also, removed front passenger seat and checked - I have the large red cable and it’s live so will be connecting that into a distribution fuse block and the powering the Audison amp...

There’s a 10mm2 cable which runs to a small fuse board under the passenger seat of my T6.1. I’m lead to believe the 10mm2 cable can also supply a DC-DC charger which I was going to do but have now changed my mind. Instead would it be possible to install a fuse and wire to a 12V accessory socket...

Moved DC-DC charger, Fogstar 105ah battery, shunt and Ablemail AMT12-2 from rear wardrobe to under the single passenger seat to free up storage room in the back. The mains charger will also be moved to under the drivers seat. I also tidied up the busbars, cabling and CBE fuse box in the wardrobe...

I am a bit confused about the swivel on the passenger seat . As you already have electrics under the seat with a VW cable harness and fuse holder fixed under the Passenger seat ? Do you have a separate plate for the seat base swivel , that sits on top of the existing seat base? If so , only the...

Have you had a conversion? Or seat swivels? The wire loom runs under the passenger seat, up the B pillar, then along the roof shoulder and down the D pillar. So trapped cables, drilled wires, loose plugs, corrosion on wet plugs are all possible issues. Post some pics so we can see what's...

Mine also came with relays however to add a degree of protection I used a perm feed from under the passenger seat and then fed this to a new relay which then provides a feed to a small fusebox and then all the relays for the seating are fed from this. It is likely I overly complicated it...

As title says, I want to run an audio cable from under the dash to under my passenger seat where I'll be putting an amp for my sub. What's the easiest way to do this? Are we talking a full seat and flooring removal or are there any short cuts? Thanks.

you can put the inverter wherever you like as long as it's cabled correctly. My LB is under the passenger seat. The inverter is over the rear offside wheel arch.

@EAN , yes mine is a T6. I’ll connect both wires into the DC-DC ad you suggest, I can’t think what else to do anyway. The additional 40 A circuit doesn’t show up anywhere in the rear wiring in the cupboard. I left the fuse in and tested everywhere for 12V and couldn’t find any. It’s a mystery...

Bear in mind if you’re fitting the alpine sub, it’s super tight under the drivers seat afterwards. I’ve a (Motexion) bulkhead in, and didn’t mind having the amp on the rear of the sub, but it would be impossible to adjust or tinker with it once the seat and bulkhead are in, plus I had to stick...

For your DC-DC consider the Victron Orion XS - it's got a higher peak charging current if you are going for such a larger battery and I think it's physically smaller and runs cooler too. Operationally if you are managing the smart shunt and solar through the Victron app you may as well manage...

This is how my voltages show across the various boxes. Engine running, Orion off and solar panels isolated. Shunt and Orion are with the LB under the passenger seat, MPPT in the rear offside wardrobe (about 3m of cable away). Chris - as you can see the voltages are exactly the same (or...

Cable Length, Sizing and Fuses: (Updated) This has been the most taxing part but I've done the maths and I think I'm pretty much there with most of it. I have made a couple of assumptions, which I'm not happy with doing, but I will document them later in this thread and hopefully get some...

EHU OUT from VANs 240v to REAR socket. Time for the RED link, as the van was up and some of the trim removed, i carried on. getting the remainder of the Blue 3core mains cable. i removed the trim from under the passenger side, down to the rear by the spare wheel carrier. we took...

All vw electrics are hidden in floor channel and then the plate sits on top which the seat base fits to ..

Currently making the most of a day where it's sun one minute, hail the next, to make this mess... :D AKA wiring in an Anderson connector from the passenger LB install to the drivers side seat back. Feeding the 2x 10mm² cables through wasn't too bad once I'd lifted the carpet a bit, but if...

@Two7Five many thanks :thumbsup: I think I’ve pretty much worked it all out! But thanks for the info. I think be managed to fit the trailer and LED headlight module (separately) directly to the seat base on the handbrake side with the alpine amp on the door side of the seat base. Had a word with...