3d printing

Afternoon. The main thread is locked, so no more trays for anyone. But, for the record, I've made barely any profit and it will be a relief not to have to watch a machine for 11 hours a day while it prints one, in case the nozzle blocks or the prints unsticks from the bed etc. I was doing it...

I have created a 3D model for a hook to hang gear from the many holes across the rear pillar and tailgate. I have been using a few bungy cords to stretch between holes to hang towels and wetsuits, but I wanted some normal hooks for hanging up smaller items. The 3D model is available here -...

I hope this OK with admins. I've started a small hobby hoping to turn turn into a business and I'm starting out small with coaster currently with the idea of growing into all sorts of products and designs. All my own design I must say. (If no one has come up with a T6 Forum coaster set I'll...

If anyone is interested, I have created a 3D model for some small attachments that slide over the top corners of my windscreen so that I can tie down a solar blanket across the windscreen. These fit my T6, I assume the windscreen thickness and spacing is the same on T5/T6.1. Windscreen Clips...

Hi all I wonder if anyone can help me I managed to break my switch panel tonight no drama I can with a bit of whittling at work make a new one as I wanted to add some switches but I’d prefer a crisper look and save lots of swearing, if anyone could help print one or laser cut some acrylic I can...

On a previous post I asked whether it was possible for a next project if someone would be interested in designing / printing a sun visor for the Infotainment system. I have now found a link to a 3D design for the T6 and wonder if anyone - @Jono perhaps - would be interested in printing one of...

Just wondering if anyone has any STL files they would share for the T6. Cup holder mods, or a fascia plate for the overhead slot by the courtesy light maybe? Thanks in advance.

Any help on what I should be checking, tomorrow I will check coolant levels after that I’m a bit lost!....thanks for any help

I cant find all the plastic plugs from when I took my rails off. Are these available separately? Do they have a part number? Thanks in advance.

Hi all. Just thought I’d share my positive experience dealing with a company called 3D Innovation, the owner (David) makes coat hooks that attach to your Transporters headrest mounts that can be used for shopping bags as well as coats etc, he also makes cup holders that slot in to the pointless...

Hi, is there anyone out there with a 3D printer or access to a cnc mill to produce replacement campervan badges coming off the headlights on the new t6.1. I’d definitely buy a set if available. looking at the dvla criteria for changing use of the vehicle one of the criteria was ‘is the van...

Hey guys, anyone on here able to do me a favour? Money your way... basically need to extende the depth of this, so a footprint of right angle part in order to act as a spacer against my panel, (it’s to hold the table when not in use) Obviously I’ll give dimensions when needed!

There seems to be lots of posta about 3D printers at the moment. I have been thinking for a while about one but now going to start looking properly. My question is what is a good printer to start with. I dont want a cheap and nasty one or one that I would "grow out of" quickly. I suppose I...

Without knowing the full capabilities of 3D printing, are there any experts that use this technology in here? The picture below is out of my Motorhome and it basically stops the internal sliding door from sliding back and forth when driving and it's broken. (I have looked at different catches...

Hi Everyone, I needed some kombi floor seat blanks but there didn't seem many options for buying what I wanted so instead modelled, designed and 3d printed some. Chuffed with the results and it stops the kids falling over the holes left when the seats are removed! Anyway if anyone wants the 3d...

So.... I have 3D printer but no good at using the design software. Who’s good at designing but doesn’t have a 3D printer? Also don’t mind printing stuff for other members FOC (depending on size lol) I need a little handle designed. Thanks Dave.

Hi there, Anyone know of any computer models of a T6 SWB that you can download into a 3d modelling package to help plan out a conversion? Thanks Kevin

Thanks guys, Just adding in the second one now Highline tailgate van view from inside 2A060DA1-A7B0-4E5C-A5B6-C6095A180152 by Sherbs posted 12 Apr 2018 at 11:33 Note the access holes for the tailgate hinge bolts Closeup 9E9CE859-5543-4AD7-B562-84F73EDE1F1B by Sherbs posted 12 Apr 2018 at 11:33...

Right then, nailed it, after two prototypes. Here's my 3d printed cubby hole tray. MK1 jammed half way in so i had to taper the sides and the tray top part. MK2 fit well but the front face of the tray was at a slightly different angle to the hole and looked bad. MK3 is cock on. It slides in...