cable

Here’s a new one for me. Anybody ever been sold heat shrink tube that doesn't work? It looks right, feels right even smells right but all it does is burn…and it ain’t shrinking! :uh run:

Hi All I recently bought a 2016 T6 that has been converted by Teahpoo. Will get some pics up shortly. The power management unit is a PMS3H and i have a RM123 fridge. I can operate this on gas but as yet have been unsuccessful running it on 240volts or 12v DC. My assumption is that this is a...

I recently managed to get hold of a kicker under seat sub and few other bits, I ordered some power cable but as you can see in the pic it’s not the same size as the one fitted to the original adaptor. Does anyone know what size cable this is so I can order some more?

Hello Just picked up a base line T6 LWB , Going to convert in January 2021 . Before I convert can anybody advise me on how to run the following cables and locations before insulation starts: 1. Reversing sensors 2. Rear camera 3. Van Alarm system Is there any other cabling I should...

I am looking to put my fuse box in the rear cupboard and need to know which size cable to use? to run from battery under driver seat to cupboards at the rear of the van. Will a fused 6mm cable be enough?

I’ve had an unsuccessful search for pictures & posts of cables coming into the cab from the engine compartment to be routed under the passenger seat. It’s the routing I’m actually after recommendations for. Should I go down the centre as per the factory loom or follow down the wheel arch and run...

Hi, I’m currently installing a leisure battery and lights sockets etc, I need to get from the drivers seat (battery) to the rear side panel for a 12v socket Etc the best route as I see it, rather than going up and down the pillars would be behind the removable foot well plastic then into the...

I'm currently routing some wires up to the overhead cubby hole area as I'm going to mount some switches up there. One from under the drivers seat and 4 or 5 from behind the drivers seat (fuse box/relays are mounted at forward end of kitchen unit, directly behind the drivers seat). I've took...

This week, I bought 2x 130Ah Valence Lithium Iron phosphate batteries, and some (but not all) of the Victron kit I need. I've also spent loads on tools ( I love buying tools), the hydraulic crimp tool is great!! Please see the diagram below, I think this is pretty much as it should be, and I...

I've drawn out about 10 different ways to route cables from my leisure battery under the drivers seat to my electrical cupboard at the back of my van. This is the route I'm planning on taking but thought I'd look to see what you've all gone for and see if anyone has any other suggestions ...

I am looking for some insulation like in this pic as the wires to the ceiling lights in my ply roof (that I taped down) seem to have come loose and I can now hear them bouncing on the ply roof. I was hoping to find some of the sponge tubing in the pic will stop this even if the wires are not...

Looking to resite my HUP from below rear bumper to the engine area - problem is my consumer unit is in the back quarter panel and id prefer not to move it (would require removing furniture, finding a new site, making a new quarter panel etc).. I have excess cable as this was always on longer...

Hi all So converting my T6 and and had an sca roof fitted, windows, carpet lining and I'm just about to fit Altro flooring on top of my 12mm ply floor. Was wondering if anyone can give advice on cable runs from front (under the drivers seat) to back (where the cupboards will be) I have a length...

Hi Currently trying to get my charging cable 10mm2 and ignition feed past the B pillar to the rear of the van where the leisure battey/CTEK will be fitted. I've had a poke around, but can't seem to find a way through. I could just come onto the panels and run the cables they will be hidden by...

Hi all, new on here and hoping for some help! Just started planning out my conversion and was thinking about the routing for the electrics and what order to do things.. I've sound proofed and insulated the walls, was thinking about doing the floor next. Do I need to get the electrics in first...

KIT LIST AND STUFF - HOW I DONE IT & WHAT I USE I keep getting asked what I use and where I got it from. . . . Most of my shopping these days is online =] It’s just way too easy now, just click and have things delivered to the door. So to make things easier for myself (and others hopefully)...

Hi - I'm new to the forum and apologies if this has already been covered, but I couldn't find anything on the topic. I'm just about to embark on a T6 conversion (I had a T2 previously). I've seen lots of discussion about hiding the electric hook-up (under the bonnet, etc) - is there any reason...

Installing 12v Socket /s - How Its Done - Another popular hot topic is Power or more commonly 12v outlet sockets, so i thought i would put together some details on how it can be done. The first thing you need to do is work out what you want and where . . . . various 12v sockets are available...

Happy new year all! I have a question regarding wiring which I hope someone can answer; I’d like to run a cable under the floor from the 12v leisure battery on one side to a kind of electrical hub/switch box(?) on the other side. The idea being I can wire any appliances (water pump for...

Iv just has my van converted and with to move the hook up connection. At moment it hangs below the sills mid side of van. This will cause probs with water when driving across country. Iv looked at various ideas and best I see is next to Toe Bar. Their is already hook up for trailer lights. Would...