cubby hole

Had some trouble doing this today to fit ambient lighting, so here's the idiots' guide. How to remove the cab interior light Pull off the clear plastic, mine was loose, you might need a pry tool. Undo the two torx screws. Use a pry tool to ease the light away from the metal frame, which...

Hello, After reading lots of previous posts regarding similar issues I've tried all the advice (removing the wiper blanking hole plugs, removing the square sun sensor rom the front of the dash) but to no avail. There is a rattle coming from the front of my dashboard pretty much all the time and...

Hi, Does anyone know if/where I can buy sheets of the material that this unit is made from. I want to try a few mods, but would need some material to play around with. Thanks in advance.

Just a quick one, can anyone confirm if the roof mounted box/shelf thing is the same on the T5 and T6? Specifically the front clip on fascia?

Here we go today's task is: To install a 12v socket from the AUX battery behind the dash and connect a 5x port Anker 50W/10A USB charger. The plan is to run 2x USB extension leads up to the top center of the rear view mirror, Plus a 12v feed for future upgrades like radar detectors and dash...

Hi folks, As part of my day van build wanted to share details of my mobile Wi-fi install. The overhead cubby in my highline has a blanking plate and rather then just having a mobile Wi-fi unit rollling about in the van I decided to fit the unit into this blanking plate. Having secured a...

Hi folks, can anyone help with acquiring another one of these panels? It’s the one from the overhead cubby that fits this gap: AC07190A-756F-4C50-BFF9-D49C2CDB772C by Sherbs posted 12 Apr 2018 at 10:18 Looks like this: 353CB2D5-7323-4633-9311-CE5EFCC8CDA4 by Sherbs posted 12 Apr 2018 at 10:18...

Hi there, I want to remove the 2 oblong lights in the roof of my van and go for LED strips, its a 2017 Kombi. Does anyone know if i can buy a blanking plate ?? id say its just a piece of plastic the same colour as the roof lining. Eventually it will all be lined but i need something for now...

Hi, I am looking for to open the roof console as show on the picture coming from Veema (First picture). But my roof console is like this with the Programmable parking heater console and the "PC210" console (main controller panel of batteries, tanks, ...) (second picture) If I can release the...

Anyone done anything useful with this? Im going to ba adding some supplementary lighting to the inside and need somewhere to switch them from and was thinking of making use of this dead space.

Right then, nailed it, after two prototypes. Here's my 3d printed cubby hole tray. MK1 jammed half way in so i had to taper the sides and the tray top part. MK2 fit well but the front face of the tray was at a slightly different angle to the hole and looked bad. MK3 is cock on. It slides in...