diy

Hi, can anyone recommend a diy pop top kit for a SWB T6 ? Or if not a tried and tested installer. Also what are the feelings regarding high top roofs pros and cons over pop tops. cheers, Pete.

SWMBO’s Octavia just been in for service and brake fluid - basically oil/filter change and check lots of things - £310 :eek: What is everyones thoughts on DIY servicing? Considering many of us rip stuff out, fit other stuff in and generally modify wherever possible! I’m the sort of person who...

Can I, a DIY hater/idiot fit a front splitter to my T6.1 ( if it ever arrives ) without jacking up the van?

Hi everyone. I'm going to take on the challenge of making some units for the t6. I can't get my head around the cost of pre made. Anyway, I've had a look at birch ply and it seems there are a few different grades which determines the quality (and of course the price!). I'm thinking to just...

Hello, should there be a security nut that came with my VW to remove the centre part of this alloy wheel?

Just finishing this, Really pleased how it works out. Enough space for several tops of battery and the other electrical gubbins fits in the front section.

Hi all, I'm curious to know how much £ you can save by doing it yourself if you feel competent with these sorts of diy. Any info welcomed. As always, thanks. James

HI, Everyone. So I decided to try and fit a pop top to my VW T6 myself. Instead of buying a full kit, I was able to find a lid, tent, gas struts, and hinges. But in order to install it I need to source strengthing bars and also the trim which finishes the job and holds the pop-top bed in place...

I've made a slot together plywood bed so I can sleep in my kombi. I can set it up as a single bed (70cm or 80cm by 200cm) or a king size bed (150cm x 200cm) - long bed because I'm 6'3 When I'm with the kids it's a bit of a squeeze, three of us can sleep on the bed with mats and sleeping bags...

I’ve finally finished laminating the last bits of ply to extend the rear platform into a bed/ loading area. I use the van for work and camping so wanted the fit out to be versatile and the platform load bearing though I do think I over engineered this a bit. The drawer is fantastic.

In the heat of Tuesday, I finally grabbed the adhesive and carpet and went for it. 2 stone lighter at the end of the day, but a result. I then did the other side with the sliding door on Thursday. I found that side more difficult, but it’s not that hard folks - have a go !

Long time lurker but I have finally taken the plunge and got myself a T6 LWB from Salop Vans. They were great, very flexible and worked with me on what I wanted. I could not recommend them enough. Van is now a perfect base for what I want. Externally complete and internally very clean ready for...

after purchasing my t6, top of the bucket list was a pair of comfy heated captains seats ready for conversion to a camper.my mate put me on to a guy who imports caravelle seats from Germany,so once installed the drivers seat was formally a passengers seat.so these are seats that I purchased.....

Looking at getting my new Stance Plus Streets fitted soon as I’m about to be placed on furlough leave! My question is - do I need any specialist tools to carry out the swap? Spring compressors I know I need but do I need a ball joint remover? Also, any advice would be appreciated.

Hi guys. I brought a new LWB T6 in July 2019. It's done 30,000km. Dealer is virus closed. Brought oil and filter today. 2.0 diesel CAAC 103kw and 340nm. They sold me 7 litres of oil and a cartridge filter. Can you please give me instructions where oil filter is etc and other relevant details as...

Wanted to continue to maximize storage space and utility in the rear of my kombi, so I made a low level centre console from 9mm ply incorporating a small tambour door and a double cup holder from a Mokka rear seat armrest. Its mostly for travelling as there is only ever 2 in the rear seats.

You know I never thought I'd find myself on an Internet forum asking about curtain material, but here we go. We're making curtains for the van and have made some basic templates. They're going to be held on with magnets which we've also tested. But what material have people used to provide...

My kombi has a tripple rear bench seat, and there is a huge amount of space under it that is unused. In last years trip I used a couple of storage tubs to put things in, which was ok, but not great. I was confident I could come up with something better, and started looking for suitable...

Hi, I just bought my first California (T6, Ocean). I'm a big fan of the bi-color version of the T6 looks an will carwrap the extra color myself. Because I want to make it look perfect I'm looking for details how to (safely) remove these items: - door handle sliding door - door handle tail gate...

Hi I will be converting a PV next year. I was wondering if there is any one in south Lincolnshire that is about to or is doing a PV conversion that would like some help or can assist me with queries? Just a thought.