floor

Hello I’ve got a sequoia table leg and want to fix it to the floor in my T6 Kombi. Considering screwing right through the rubber flooring and into the metal floor, or, cutting a section of rubber floor out and gluing a section of timber to the floor and fixing to that but unsure what’s best...

So I’m using 9mm ply to pack out under the 12mm floor. This seems the right width in the area by the sliding door but to the rear the low points of the floor become quite uneven and it looks like if I pack these areas I will create some serious high points. Do I try and get some thinner ply in...

Looking for some advice fitting my ply floor. Planning on 9mm batons glued down, 7mm insulation and the 9mm floor over the top screwed down. The more I look into it I haven’t seen anyone install insulation over the floor completely but just in between the batons. Anyone tips would be greatly...

I'm about to lay the 12mm ply floor in my conversion and was wondering if anyone seals the edges of the ply with varnish or something similar before putting flooring down. Might be a bit of extra protection incase of spillages, wet boots etc?

Hi all Any ideas on what I can use to trim the join between the rubber cab mat and the ply floor with vinyl in the camper part of the van? Thanks

Well my vanstyle raised step doesn’t seem to fit with my 12mm ply floor, the bottom section doesnt sit on the base metal... although the rear piece fits perfectly. Any ideas on which others I should be looking at that would fit? It’s for a pannel van, ply sitting on top of the metal ridges...

I am in the process of fitting tie downs to the rear of my Kombi, When the van was converted from a panel van the conversion company used a one piece ply floor. Does anyone have the measurements for the location of the threads or advice on how I can locate their positions before i end up with my...

Just tried to find a DXF file for the universal floor for a T6.1 (T6) on the vw bodybuilder site. MOst things can just be downloaded but this file asks for a password. Anyone know where I can get a DXF of the SWB floor so I can CNC a hexa ply floor.

Got 9mm battons and 12mm ply floor. What size screws are best and any type? I know its common sense but just want to be double sure. Thanks

Hi all, just wondering if anyone has had a van furniture oak floor fitted, or anyone else with experience of it? Really like the look of it, but am concerned about the MDF core under the Oak Veneer...any Advice greatly appreciated.

Anyone tried replicating the wood look floor from the various special editions in their Caravelle/ Multivan? I love the look and the cleanabilty is attractive vs carpet. I’m thinking the best option is to buy a floor from breakers yard, remove carpet layer and replace with altro or vinyl tiles...

new SWB 2019 Transporter, brand new freshly varnished single piece 12mm ply floor from Infinity customs ( paid £156 ) and a piece of Altro industrial slate grey contrax anti slip vinyl; still wrapped in its postal tube ( paid £108) excluding shipping . Both unused and brand new .... Expecting...

We've got the campervan extreme kit from deadening.co.uk which comes with some silentcoat, and 2 rolls of the dodoliner extreme. The instructions say to use the dodoliner on the floor and walls, and the silentcoat on the walls and wheel arches, etc. Just checking, will we still be able to fit a...

Hi guys, I'm removing my Kombi set up with seats, rubber floor and tie-down points. I am left with the factory holes from the tie-down bolts and will be left with holes from the Kombi seat brackets. How should I deal with the holes before getting my plywood floor down e.t.c

Has anyone used silentcoat or similar on the rear of their van whilst using or fitting caravelle seat rails. I've searched and searched the forum but it doesn't seem to have been covered previously. What does an original T6 Caravelle van floor look like ? is it insulated under the rails? or...

So I’ve cut my new 12mm floor and I’m now ready to fix it down, how has everyone done this, self tappers, sikaflex 221 , or both?

Hi I’m just about to start the flooring and need to remove those load clip things, they are bolted with a star type nut, what size are they please

Hi guys, looking for recommendations for ply boards and the 12mm ply flooring. I've heard of people before getting dodgy fitting ply floors so just want to get a decent one. Thanks

We really fancy a oak style flooring in the van. all flooring pics are welcome! We currently have the kombi load lining in! Cheers in advance callum

After adding the foil insulation, (into the gaps) I'm going to be securing the three piece 12mm flooring. I was just going to screw it into the 9mm ply I've glued in, however I've ready that many people glue and screw. Gluing seams so final, if you want to make any changes it's not coming back...