Hi everyone, a bit of a newby here , so all help gratefully received ! I have a manual T6 2016 which has suddenly developed a problem selecting gears. I was pulling away from the Cornwall / Devon toll booth and suddenly lost the ability to select 3rd. I have actually lost reverse, 1st and 5th...
I have a 2019 woth a 5 speed gearbox.
I have a kind of notchy first gear.
From standstill going in to first and taking of the clutch position seems much more like balancing on a knives edge (exaggerated) then when going from any other gear to the next.
No slipping pr any other problems.
Any...
Hi guys. When driving past walls and I let of the accelerator and back on I get click or clunk. If I'm going slow in wrong gear I ratlles like hell. I've checked driveshafts. I've had them off and it seems there is a fair bit of gearbox backlash on the diff. How much is excessive on a t6. I...
Hello,
My transporter t6 5spd manual 84kw makes this weird gurgling noise when changing gears. It has new dualmass flywheel and clutch fitted at vw dealer. Its coming under my feet and i can hear it in cabin.
What could it be? Youtube link
Up
I have noticed a few drips of oil on the floor where I normally park. Looked under neath to see a bit of a mess.
It's oil I would say and quite clean oil at that. Took the under pan off to investigate and this is what I have found. I would normally take it straight to my local vw indy who do...
Hi All
I'm getting a clunk going into first gear, and most of the time gear changing is a bit jumpy when going up through the gears. All the gears select seemingly perfectly, clutch point is perfect and no slipping. No DMF rattle or strange noises.
One this I've noticed just recently - if I'm...
As per heading. Do we know if the T6's are experiencing the same issue with the drive shaft spline wear.
My T6 103Kw DSG is showing some backlash that I can not explain. All rubber mountings on engine and gearbox have been replace OEM VW. It is a lot better, but not what I would consider to...
I have a 2017 T32 204 DSG 4motion that’s now done just over 100k miles. Had new cam belt and water pump at about 99k in May this year and all was fine. Just recently engine has been labouring and sounding a bit rough in D7 in lower revs and I have to press accelerator to get it to drop down a...
Think I posted this ongoing problem last summer (but cant find it lol) when I first discovered that sometimes when I select reverse there would be a slight 'crunch' and the van would jolt ever so slightly.. 2016 lwb 5spd T32 102, 37k mls. Under warranty. On a visit to BMVS in the summer I asked...
Can someone please advise me, my reverse lights have suddenly stopped working.
The bulbs are all fine. I can’t seem to locate the fuse location on any of the downloadable documents, could someone point me in the right direction please?
Also, if it isn’t the fuse. Does anyone have an idea what...
My 150 van was booked in for a problematic door lock. When I arrived they asked if there was anything else wrong with the van. I mentioned second gear can be a little crunchy at times and thought nothing more about it.
I came to collect the van, and was told it needs a new gearbox...
Hi
It doesn’t always happen, but sometimes I’m feeling a bit of a clunk when I release the clutch to go up to 2nd gear.
anyone else had this? I’m slightly worried it could be drive shaft, but weird that it only happens occasionally. It’s a 102 with 32000 on the clock
any one fixed the issue with T6 highline 102 juddering doing about 30mph in 3rd 4th gear I’d just come back from a 30mile journey up the A1 so had a good run. Vans done 4K I’ve done 2k since I’ve had it
Hi guys, newbie here.
I have a 65 plate T28 SWB 102,Manual 5 speed... I have a little issue that needs addressing!
Driving home from work yesterday on the motorway and I started to slow down so as you do, I start changing down gears.
However, I'm unable to! its literally getting stuck in 5th...
I have started to notice the change down from 3rd to 2nd is getting much jerkier. Its a 16 plate 140 Kombi with 84k on the clock, and has just had the 80k service which included a gearbox oil change. From new there would be the occasional "blip" when changing down, and I put this down to the...
Hi all,
I’ve just brought a 66 plate 102bhp t6 van. Absolutely love it, apart from a whine that starts once I engage 5th gear? Dip the clutch or change down to 4th and the noise disappears? Anyone else encountered this problem? Not sure if this is a normal noise or gearbox/clutch/bearing fault...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.