Audio upgrade Stage-1 . . . . BLAM Relax 200RS speakers from Skipton.
As the title says, so i thought i would bring you along for the ride . . . . . . . . .
stage 1 was to sound deaden the doors and door cards and fit the new 8" speakers and tweeters.
stage2 will be fitting the amps and sub ...
Hi All,
Not sure if this is of use but I took a few pictures as I fitted my D2 diesel heater, may help people having a go themselves.
I’m not a pro at fitting these and this is the first I have done, any criticism is welcome.
For reference this is the underslung T6 specific kit and I’m...
HOW TO TAILGATE
This is a guide to replacing the barn doors on your T6 with a tailgate. The conversion is in itself simple, with the parts being bolted on, and falls in to three elements - having the parts present, having the tools available, and having the electrical system altered.
Parts...
Wash & Wax time . . . . . . but which one and how?
So kinda as the title implies it time to wash the van... (getting tree sap on paintwork from that poxy tree)
took to the local american hand car wash was yesterday for the external wash . . £10 later all nice and shiny
but they never do a...
This one took a while to get around too, so there is some general chat and details below........ Then onto the the actual MOD, Plus Video near the bottom of the thread too =]
Happy Watching
**********************************************************************************
Any1 tried any...
Anyone know if the T5.1 and T6 A pillar trims are interchangeable? I know I'd have to transfer tweeter grilles if I wanted to use aT5.1 trims but that wouldn't be a problem. I see that accessory companies sell grab handle kits that fit both so I'm assuming those bolt holes are the same but I'm...
Ok, I've decided to 'upgrade' the H4 headlight bulbs.
New bulbs have been purchased.
Any hints 'n' tips as to the best way of getting the 'old' bulbs out...?
It's pretty straightforward to loosen the metal retaining clips and remove the black plastic caps over the rear of the headlight unit...
as above .
Can anyone please tell me how to remove these so i can wrap them?
I did try removing the grill (the one with the vw badge) but had no luck!!
Thanks n
So here is Phase#2
A 12v Ignition feed for gadgets and also a 12v socket behing the dash with a 5xUSB power outlet.
The Dash and trim were already apart from phase#1 so we continue from there....
We got a 12v socket extension cable again (15A max, 3mtrs long) and cut it down to size.
we...
From the factory T6 Webasto aux/parking (water) heater comes configured to heat cabin only.
Up here in Finland the vans come with overhead control/timer panel to allow the use of timer or remote to switch on engine and cabin preheating before setting off. The heater is configured by dealer to...
Module 17 – Instruments carries also the coding to select a few scaling factors for speedometer.
Byte 0, bits 0..3 have mysterious value “K-number”. It turned out changing this coding adjusts measuring values IDE00842 (K-number) and IDE00845 (Wheel circ. mm) of module 17 - Instruments, and...
This guide takes you step by step through fitting DC-DC charging kit for leisure batteries on factory California.
Why fit this kit:
VW are still installing their standard split charge relay on vehicles fitted with leisure batteries, however, the latest Bluemotion technology has a few...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.