kombi seats

Hi, probably a stupid question but is it better to remove the third row of seats out via the tailgate or the sliding door? They look heavy and I don't want to damage the paint on the inner wheel arches. regards Skoti

I've had a look through the forum and can't see this question. Are these the only 'reinforcement' plates needed to fit seat belts to the C pillar of the panel van? Regards Logan

7H0-803-547/A x4 7H0-803-548/A x4 I bought the kit from transporter hq then fitted a triple so these are genuine Vw and unused. No longer needed £30 delivered

All the items below were removed from my 2017 T6 Shuttle (mileage 35000miles) when it was converted to a camper. It is all in good used condition and I have tried to keep the prices roughly the same as other adverts on different outlets. There will be room to negotiate depending on demand as my...

Hi All, I had a search but can't find anything. I'm going to be fitting a 3 seat bench in the third row position on our SWB 4Motion kombi. It seems the fitting points are above the rear diff, has anyone had any experience of this? Is it still straightforward or an absolute pain? From a quick...

Hi guys/girls, So I’m converting my T6 Kombi SWB into a Camper, typical layout 2 seat smart bed and kitchen on the side. I’ve had an idea of possibly keeping the rear single seat next to the sliding door that can be used from time to time making it a 6 seater again. Majority of the time this...

Hi all I've just ordered 2no. middle row middle seats (with integrated seat belts) to fit in the 3rd row of my kombi. I'm planning on fitting them left and right (tight to the arches). I've seen it done before but I'm unsure of which reinforcement plates I need to fit underneath? Can anyone...

I’m selling a triple rear bench, in grids fabric. From My 2020 T6.1 It can come with the seatbelts if needed and brackets and even the rubber flooring which will be cut just behind the drivers seat. I’m getting a rock and roll bed and new floor. Any questions please ask £275 Ono

Hi all, just gauging interest. I will soon be putting up (end of Feb) a full 2+1 rear kombi seat set up in bricks fabric. Comes out of a 2021 T32 6.1. Will include rubber floor mat, floor seat brackets and the 2+1 seats and belts. Unsure of price at the moment but looking for £600 ono. Its...

I have a SWB converted kombi with 1+1+1 seats which is a great multipurpose vehicle. The seats are removed regularly to suit my work/family life and I find the arrangement very versatile. We are excited to have a second vehicle (LWB panel van) turning up in the next 30 days and this will be...

2+1 seats in leather with blue piping, comes complete with seatbelts/floor mounts and floor mat to suit a swb twin sliding doors. Also comes with the tie down rings etc. Located in Lanarkshire Scotland Collection only Edited- also got the standard simora seat covers if you wanted them £600

Hi, any ideas on whether any kind of cover exists for this bracket? I have one in the other side (2nd pic) but I can’t for the life of me find the name for it and whether there is a right hand side version.

I have a new T6.1 on order and I'm collection various bits (wheels etc) in keen anticipation of making the van my own. One of the mods I'll make is to replace the rear 2+1 seat with 1+1+1. The dealer tells me the factory wont do this but I read else where that people are selling new 1+1+1 from...

All genuine VW Original Used Parts from my 2015 LWB Kombi Transporter. Lots more Pictures available... Please contact me for more information. Triple Bench Seat In good working order & tidy condition... comes with all floor Fixings & 2 VW Seat Belts & fixings. £250 Rubber Floor from LWB Kombi...

Taken out of my t6.1,condition as new No brackets or belts included Pickup Manchester £250

Hi all, Has anyone fitted 2 middle seats (the individual ones with seat belts) into row 3? If so, do you mind sharing photos and any feedback please? I'm trying to work out my new seating configuration (I currently have a 2+1 factory Kombi) and up until now I was thinking of adding a triple...

Rear 2+1 seats in Simora, taken out of my 2017 Kombi, immaculate as hardly used. The van only has £24k on the clock! Have all 8 of the floor mounts (there are only 6 in the photo but I have all 8) plus the 2 rear seat belts. Collection only due to the size / weight from Ashford, Kent. £650...

4Ohm 12” JL sub and custom enclosure for under rear Kombi seat. This is a 12” 12W0V3-4 sub in a custom built sealed enclosure that is build to the exact correct volume specifications, but still allowing it to fit under the rear twin Kombi seat. The box is made from 18mm MDF which has been...

Hello. Looking for some advice, please. We unclipped and removed the back 3 seater bench in our 2017 Shuttle. It just won't clip back in! It looks like the clippy grabby pincer bits, which should grip onto the bars on the floor, are jammed half closed. Please, does anyone know how to fix...

For sale: Kombi Triple Bench Seat, 3 seater. In excellent condition. Simora fabric With: 2 x Kombi Seatbelt kits (bolts, washers and brackets). 4 x Seat Floor Mounts and trim covers 6 x Kombi Tie-down sets Came from my 2018 T6, and has had a Seat Cover on from brand new. Photos show...