Hi
When I installed my leisure battery I fitted a CTEK D250SE which works perfectly. But now I want to also install an electric hook up, I am okay with getting the mains power in to the van but am unsure how to set this up to keep my leisure battery topped up. My questions are these, is there a...
This is my current set up in my 2018 Caravelle, a mess of wires of a Factory specced Eberspacher Auxiliary air heater and 2nd battery, plus a few extras fitted by the previous owner, all under the passenger seat:
This is the wiring diagram as it sits:
I've got the standard split charge...
Afternoon all. Just looking on 12V Planet and seen this:
Seems that maybe the high heat at full capacity may have been addressed looking at the details.
Hi -my victron charger has locked out on input voltage - I had a bad connection on the line fuse from main battery. Can anyone advise how to get system operating again?
Thanks
Steve
Hi, I'm installing a leisure battery and Victron B2B charger and would like to sanity check the wiring. I already have amps, distribution box and fuse box installed so want to slot the battery and charger into the current setup as simply as possible.
Can someone qualified reassure me that...
Evening all,
Completely new to converting a van, so just wanted to ask a few questions please.
I'm converting my T6 van and looking at the forums and online shops I'm leaning towards the victron setup.
The main thing I would like to have is the battery sited mid/end van, rather than under the...
Can I use a distance of 1.82m (6 feet) 16mm2 cabling between a Victron 30a DC charger and a lifep04 leisure battery without issues or must it be a shorter distance between the two. (I know it should be as close as possible but not sure if their is a maximum distance?).
I don't currently have any monitoring on my leisure battery so I was hoping to install the Victron Smart Shunt to give me some visibility of state of charge and voltes etc. After lots of research (and I'm still learning) I don't think it will work with the Non-Isolated version of the Orion-Tr...
Hi guys, I’m just wiring in my victron tr smart dc to dc charger in my 2017 transporter.
I’m happy with all the wiring apart from the green L/H terminal. It comes bridged in the box , I’m sure I have seen somewhere people taking the bridge out and wiring it to the fuse box …… do I just leave it...
Hey all, new member here but I've been lurking for a while, all the time searching for a T6 Caravelle to replace my Skoda Superb Estate which I've owned since 2019, and has been brilliant as a wagon taking me and my bikes to all corners of the UK.
Today, I collected this! It's a 2018 Caravelle...
Victron Blue Smart IP22 Bluetooth Charger - 12/15(1 output)
Only used a couple of times as I had to change it for the double output version.
£70 - Collection from Portsmouth (or plus £5 p&p)
Thanks
Rob
I'm looking at fitting a Victron IP22 Battery Charger - I've got two possible locations 1) inside a cupboard with minimal airflow or 2) on the outside end of a cabinet. I'd prefer the internal method as it's out of the way, however I have read a few posts where there are concerns about the...
I was looking around to find the simplest Euro 6 electrical kit I could. I found this website that sell their own version of the Victron.
The company reviews on trustpilot are good but everyone seems to be using the Victron device.
I only found one reference on this website to the company with...
Hi All,
due to my limited understanding of electronics, I’m asking for some help!
I have a campervan, professionally converted T6.1 Transporter.
it has a solar panel and leisure battery with the following kit:
Victron units:
ORION TR Smart isolated DC-DC CHARGER next to leisure battery under...
I am now ready to install a leisure battery.
I thought I had decided on a CTEK Dual, but now am looking for alternatives.
I would like it to have the option to input from a solar panel for ease of future installation.
What options are there/what would you recommend?
Thanks
Putting this up for sale.
Will include box and manuals.
Preferably to be collected at Busfest (I will post if need to and agreed with buyer).
The unit is currently in my van, photos can be arranged and a video to show fully working if requested.
Any questions please ask...
I'm trying to decide between the Victron 12V 15A and 25A mains chargers.
My intention is to install the charger and consumer unit under the bonnet with a Victron 12-12-30 DC-DC charger and have the charger easily removable if I need to use it on another battery. I currently use a piddly 12V 6A...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.