wheel bolts

I've been so lucky I haven't had a flat tyre or I would of been stranded. My van came with 20" Wheels and a 16" spare which isn't ideal but I hoped it would get me home. I've recently fitted new brakes to the front of my van so I needed to swap my spare for a 17" steel to clear the calipers...

Hi, I have 20" Hawke alloys on my T6. I'd like to put spacers on the rear to bring the rear track out to match the front. I've worked that out to be 15mm spacers. (30mm total) I have 75mm long taper bolts on the wheels at the moment. That is 50mm of thread. If the rule of thumb is 1.5 X thread...

Gents........my son just bought me a milwaukee 3/8ths impact wrench so I'm looking for some sockets. What size are the wheel bolts ......I'll probably have to buy a 3/8th's to 1/2" adapter as I don't think 3/8th's go beyond about 22mm? Cheers guys!:thumbsup:

What do you think about the bolt length winter 27mm(steel) vs summer 25mm (alu). Seems ok to me but im not entirely sure about the recomended "push through" length. Winter Summer

Hi there gang can anybody help what are these from

Hello Looking for some standard wheel bolts. Really want them tomorrow (Saturday) if someone could post special delivery with Royal Mail I am happy to pay postage. Thanks.

Afternoon All, Can anyone help me with my wheel spacers question. Wheels I have are Wolfrace GTP 20x9 offset 45. I currently have spacers but want to remove them which I can do no problem.The main issues I have is the gold central space in the Image. This is what centralises the wheel on the...

Fitted aftermarket wheels to my T6 and confused what torque is needed for the wheel bolts. The oem wheels and ball seat bolts were tightened to 180nm which I understand is vw spec. However the aftermarket wheels are using 60 degree tapered / conical wheel bolts which the tyre fitter suggested...

Evening all. I need 4 standard wheel bolts. They are for Devonports on a 2020 Highline. Any idea of a part number or are there any for sale please. Cheers. Dan

Before I buy some new I thought I'd ask here first. I'm looking for 15mm longer than standard wheel bolts (so 50-52mm I think) to suit Davenport wheels. Radius fitment not tapered and ideally with the floating collar as per original style. Ten required in total.

Sitting outside the RSC waiting for the AA. Leaving work ran fine then 20 mile later a knocking sound from the engine. Pulled over and checked everything, no leaks nothing so carried on. Within seconds, same noise, pulled over again but couldn’t see anything. Driving through Stratford I decided...

Can anyone please recommend some or tell me what specs will fit? Most locking bolts I've seen say they work with OE alloys / aftermarket alloys and have a big red disclaimer saying they don't work with steels! I've got OE 16" steels. Cheers in advance!

full set of 20 M14 x 1.5 60deg taper silver wheel bolts and key 33mm shaft with 28mm thread. £15.00 collection from Manchester area, possibly post at additional cost.

Hi All, i have ordered 20mm for rears and possibly going to order 10mm for the front to be fitted with JBW steel wheels, What new bolts doe i need to order as i think the ones coming with my rear spacers are to fit alloy wheels...? thanks in advance... dunc

Anyone sold their STD wheels and still got the std wheel nuts lying around. I'll happily by them off you. I got the STD set of wheels with my van when I bought it but no wheel nuts. In urgent need as the wife has given me permission to get my 20's powder coated......yipee

Hi, I've recently sold my 17" Devonports and with that all the OEM nuts and locking nuts. I'm now running 20" wheels with the required new nuts, however I forgot that I still have my spare should I need it. Anybody know what size nuts I require for the spare or whatever the original size would...

Hi all I have just received some banded 19 inch Range Rover steels can anyone advise on what wheel bolts I need? Will my original bolts work from the factory highline alloy wheels? I also need the correct spigot anyone have any links? Thanks Ash

Anyone got suggestions for replacement wheel bolts? Mine are original and look pretty rusty and manky, which simply won't do. I bought some wheel bolt covers for them a while back, I did a test fit of just one of them and found it was very tight. Tight is good in term of it not falling off, but...

Anyone in Pembs got any standard steel wheel bolts? Only need five but will take a set if that's what people have... Trying to get rims fitted before Thursday if at all possible?? Cheers, Dave

Just put my summer wheels on today and managed to ruin a couple of the H&R supplied bolts for the 25mm spacers. These are the ones that bolt the spacer onto the hub and have a shallow head. Anyone know where to get a few spares? I'd like to be able to use these again but not with 2 rounded...