19" Amarok Cantera Wheels

[SamD]

With the canteras is the centre bore the same or do you need spigot rings?

Straight swap, didnt use spigot rings on mine

 

[teamfly]

Bolt straight on with standard bolts

 

[Navyboy75]

Cheers lads, I couldn't find or see the centre bore size anywhere.

 

[moomin-j]

With the canteras is the centre bore the same or do you need spigot rings?

No spigot rings needed. Fits a T6 or T6.1 no problem
Centre bore of 65.1 is the same as Claytons & Devonports

 

[t6blo]

No spigots, standard vw wheel bolts and lockers - smashing.

 

[dubber36]

If you have bolt covers, they don't sit all that nicely and feel a but loose, but I've not lost one.

 

[t6blo]

If you have bolt covers, they don't sit all that nicely and feel a but loose, but I've not lost one.

Yes, I fitted the bolt covers that were on the Clayton’s - they do feel abit looser but like you I haven’t lost one in 5 months

 

[Navyboy75]

I'm on air with no other mods, at the moment but still want a decent load rating other than a wafer thin mint so opting for a 235/45 it's a 99 so better than a 93. Looking on will they fit I shouldn't need a spacer. We'll see.

 

[Samro]

@Samro what height are you sat at? Is it just a 15mm spacer on the rear you have?

Apologies for not replying @Ads_Essex

Yes, 15mm at rear. No spacers at the front.
.......... better to respond late than never!

 

[T6 dork]

if your on 19" the best size for load rating is 245 45 19 102Y
245/45R19 ACCELERA PHI 102Y XL are the ones i use on all my cars

set of 4 £290 inc vat trade price to me

 

[Navyboy75]

if your on 19" the best size for load rating is 245 45 19 102Y
245/45R19 ACCELERA PHI 102Y XL are the ones i use on all my cars

set of 4 £290 inc vat trade price to me

That's what I would go for but to big for air ride with no other mods.

 

[Belly]

Got a chance to buy some New Vw Cantara alloys with 255/55R19 tyres, my question is will
the 55 profile be too much on a un lowered T28 .. T6.1

 

[coullstar]

Massive, too big IMO. You need a 45 profile on these.

 

[t6blo]

Currently no spacers but just ordered some 20mm hub centric for the rear…. Will post pics when arrived and fitted.

 

[t6blo]

Just fitted the 20mm PCD rear spacers from here ….

Pardon our interruption...

Before


After


Before

After

Before

After

 

[moomin-j]

Just fitted the 20mm PCD rear spacers from here ….

Pardon our interruption...

Before

View attachment 204125
After
View attachment 204126

Before
View attachment 204127
After
View attachment 204128
Before
View attachment 204129
After
View attachment 204130

@t6blo , looking good that is & fills the rear arches just right.
Nothing to space out the front’s?
What are you lowered by & what size rubber are you running?
Cheers

 

[Bav]

Currently no spacers but just ordered some 20mm hub centric for the rear…. Will post pics when arrived and fitted.

View attachment 203479

If I hadn't got my heart set on a deep-dish, staggered set-up (eventually), I'd be 'round to yours at the dead of night with a jack and a few bricks!

 

[Benh76]

Just fitted my canteras on a T6 California but could only get away with 15mm spacers on the rear or the door card was catching the wheel.

 

[t6blo]

@t6blo , looking good that is & fills the rear arches just right.
Nothing to space out the front’s?
What are you lowered by & what size rubber are you running?
Cheers

Thanks

I haven’t fitted anything to the front as I think it looks ok without.
Lowered about 70mm on STX coilovers - all the way down at the front and adjuster deletes at the back
Tyres are 245/45s

 

[t6blo]