Sold 20” Judd T311R Staggered With Tyres

[Luker22]

For Sale are my 20” Judd 311R Staggered rears.

Fronts: 9.0X20 5X120 ET38 JUDD T311R (MATT GUNMETAL)

Rears: 10.5X20 5X120 ET45 JUDD T311R (MATT GUNMETAL)

Tyres:275/35R20 EVENT POTEN UHP XL 102W

I brought and had them fitted at WheelBase in Jan last year and have covered around 3k miles.
On one centre cap there is a tiny chip which I have touched up. This is extremely tiny but I’m fussy!

Other than that the wheels are immaculate.
No curbing/scratches/buckles

The tyres have around 6mm tread, all have even wear.
The wheels drove perfect, no vibration or rubbing. My vans a T28 on B14s fully down at the front and a few threads off fully down at the rear, but with weight from conversion.



Located in the Derby area. Collection only please.
Looking for £1250

Thanks.

 

[Jayjmac]

@Luker22 great wheels!! Are these not rated to 880kg for 20s?

 

[Luker22]

@Luker22 great wheels!! Are these not rated to 880kg for 20s?

Thanks, these have 815kg stamped on them.

 

[Paul Bishop]

They are stamped 815kg on the wheel but this is not the factory load rating, having checked this out from Judd themselves please see correct load ratings on wheel with enclosed photo

 

[Luker22]

They are stamped 815kg on the wheel but this is not the factory load rating, having checked this out from Judd themselves please see correct load ratings on wheel with enclosed photo

View attachment 97408

Ok, thanks for the info.

 

[dubhead]

@Luker22 would consider selling without tyres? As they are too big for what I need

 

[Luker22]

@Luker22 would consider selling without tyres? As they are too big for what I need

Not at the moment as I’ve had a fair amount of interest in them, so will wait and see before I consider. Thanks,

 

[PIPPS30]

Good evening are these still for sale

 

[Luker22]

Good evening are these still for sale

Yes they are

 

[Deanord]

Nice wheels!

Do they need spigot rings or do the fit the centre bore correctly?

Do they need special bolts or will oem bolts work?

lastly, do they run on the inner arches or on full lock?

 

[Luker22]

Nice wheels!

Do they need spigot rings or do the fit the centre bore correctly?

Do they need special bolts or will oem bolts work?

lastly, do they run on the inner arches or on full lock?

Thanks,

They do need spigot rings

I have the bolts and will include these.

With my suspension setup, they have never rubbed in anyway at all front or rear.

cheers

 

[Deanord]

thanks, let me have a think. got any pics of the van from the side, level not arty wonky pics?

 

[Luker22]

Deposit taken, so provisionally sold.