Amarok Wheels on a T6
Hi, I need to make a decision on wheels for my T32 Highline Kombi very soon and have settled on these at 18”. Before I go any further is anyone running these already and any obvious issues? It’ll be lowered on Bilsteins to their highest level (30-40mm?).
Thanks,
Ian
Thanks,
Ian
Last edited:
I have the same rims van drive perfectly with themHi @Anthony Ball after seeing your post of your starlight blue with your Amarok wheels, have also taken the same route. Hope you don't mind me copying your lead, I'm loving the wheels. Thanks for the inspiration.
View attachment 29329
Has anyone fitted spacers to their 19 Amarok wheels? My rears tuck slightly more than the front and it’s killing me. I have had a look about and it seems the only options for spacers are 5mm or 15mm. Would love to try 10mm but it seems they won’t work on the T6 rear hubs.
If anyone has pics of spacers on the rear with these wheels I would love to see them.
If anyone has pics of spacers on the rear with these wheels I would love to see them.
Might be worth speaking to these peopleH&R Wheel Spacers for VW Transporter (T5)
When I measured mine, there was 15mm difference each side between the Fronts and Rears. (The rears are set 15mm in, relative to the wheel arches compared to the fronts)
Yes i have fitted 15mm spacers and longer bolts with Aragonit 19's to the rear only
looks much better with no probs
i buy all my spacers from a local company and these are the ones
www.ebay.co.uk/itm/VW-Transporter-T5-T6-Pair-5x120-Hubcentric-Spacers-15mm-65-1CB-10-x-19mm-Bolts/123420967265
PS if you like these wheels i have 2 sets for sale
looks much better with no probs
i buy all my spacers from a local company and these are the ones
www.ebay.co.uk/itm/VW-Transporter-T5-T6-Pair-5x120-Hubcentric-Spacers-15mm-65-1CB-10-x-19mm-Bolts/123420967265
PS if you like these wheels i have 2 sets for sale
Last edited:
Thats exactly what I was after. Would you be able to take some pics from the rear so that I could get a better look at how close the wheels are to the edge of the arch? Would love to see how far the poke out compared to the fronts.
Come on then show us what it looks like lowered then?
I'm also interested in what width spacers you go with
This is how mine currently sits without the spacers. I just ordered a set of 15mm ones from the above link so will update once fitted.
This is how mine currently sits without the spacers. I just ordered a set of 15mm ones from the above link so will update once fitted.
Looking good
are you running 245/45/19s tooThis is how mine currently sits without the spacers. I just ordered a set of 15mm ones from the above link so will update once fitted.
Yes 245/45. I think the 15mm spacers might be a bit too much but it seems I don’t have much choice. What spacers are you running?
