Looking to get these looks the nutsThose are 235/70/16
View attachment 96933
Are spacers needed ??....and how much has the van been lifted..thanks
Looking to get these looks the nutsThose are 235/70/16
View attachment 96933
Looks fab !Mine are 245/65/17
View attachment 114834
Looks fab !
What suspension are you running ?
How are you finding performance with these tyres on? I've got an 85hp startine and just put some tyres this size on. it's struggling to get up to speed and maintain motorway speeds. Seriously considering a remap! They look brilliant thoughMine are 245/65/17
View attachment 114834
Have to say, not noticed any difference. Just had them put on my 4t motorhome as wellHow are you finding performance with these tyres on? I've got an 85hp startine and just put some tyres this size on. it's struggling to get up to speed and maintain motorway speeds. Seriously considering a remap! They look brilliant though
View attachment 124876
Thanks for the reply I've gone from 205/65/16 on basic steels to 245/65/17 alloys - I put t6 in the shop website I bought them from and this size is what came up- will see how it goes. May end up going down in side wall size but time will tell!Have to say, not noticed any difference. Just had the, put on my 4t motorhome as well
To be honest, don’t understand any of it. I took advice from this forum and a specialist wheel and tyre supplier and am very happy with what I have.After lots of reading, I still don’t understand why for a 6.5J rim, they reccomend the max tyre section should be 215 and yet so many people go above that. Surely you’ll be daft if in a relevant accident it invalidates your insurance and your done by the police for manslaughter?
Also is it just the same if you go from 65% on the side walls to 75% with a 16 inch wheel?
BYW I want to go 225/75/16 too
Hi is that standard springs/steels… love itThose are 235/70/16
View attachment 96933
Hi Graham. How are they now you've had them on a while?Hi all, newbie here.
I've just bought a 2018 twin slider Kombi SWB.
It's taken so long to find one I nearly gave up.
I plan to convert it over time.
I've seen lots of threads regarding all terrains and whether they will fit.
I've fitted 225/75/R16 Falken Wildpeaks on factory 16" Claytons.
I've attached a few pics.
There is absolutely no rubbing and they seem a lot smoother than the original tyres.
I'm sure I will be perstering all of you in the future for advice.
Regards,
Graham
View attachment 248606
View attachment 248607
View attachment 248608
View attachment 248609
What were they like since you posted?Hi, hoping I haven't just made an expensive mistake. I've ordered 225/75/16 BF Goodrich KO2's for my standard 16" Clayton alloys. I've just found out that for a 6.5J rim, max tyre section should be 215. I've noticed a number of members saying they've put 235 section BFG's on their Clayton alloys. Should I be worried? Thanks for any guidance
I have since changed wheels but they were ok. No rubbing at all. The speedo was out but I knew it would be anyway.Hi Graham. How are they now you've had them on a while?