Dub Haus Build Thread

Full Victron Spec will be:-
3 x Lithium 12.8V-160Ah Smart LiFePO4 Batteries
2 x Lynx Distributors (One for Battery Connections, One for Load Connections)
2 x Orion Tr Smart 30A DC to DC Chargers
Orion Tr Smart 12v - 24v DC to DC Converter
Lynx Smart BMS
Cerbo GX with GX Touch 50
Smart Battery Protect 220A
SmartSolar Charge Controller MPPT 100 | 30
Multiplus -II 12v | 3000VA | 120A
Various Blue Sea Isolators / Switches / Fuseboxes

Kerching! :oops:
 
Small update, correct colour cable arrived today so wrapped up the direct TPMS loom ready for install
IMG_4270.jpeg
 
  • Like
Reactions: CAB
Wrapped up the side assist and PLA looms
IMG_4277.jpeg

Removed the rear lights and covers to run the side assist wiring and discovered this!
IMG_4279.jpeg

That’ll be the additional wire for the nearside fog light!

IMG_4281.jpeg

No seal in the plug! Worst dry soldered connection I’ve ever seen! and wire is 0.5mm not 1mm :rolleyes:

Side assist cabling now in place
IMG_4285.jpegIMG_4284.jpeg

Now waiting for a new rear light plug as the locking tab has been mullered! and time to drill some holes tomorrow :thumbsup:
 
  • Like
Reactions: CAB
Rear side assist radars fitted
IMG_4291.jpeg

Holes marked and drilled, painted with cotton bud (drags paint onto the back of the hole)
IMG_4292.jpeg

M6 rivnuts with a touch of tiger seal just to make sure nothing exposed to the elements

IMG_4293.jpeg

and bolted in :thumbsup:
 
Another job in progress
IMG_4327.jpeg
Westfalia detachable tow bar

Torque it up and refit all the plastics tomorrow. Bumper may have to wait a while as I need to make the two extra holes for PLA and paint the sensor mounts
 
  • Like
Reactions: CAB
Happy days :thumbsup:
IMG_4329.jpeg

TPMS module arrived :)
IMG_4328.jpeg
and that’s where the oem mounting bracket clips into :thumbsup:
 
  • Like
Reactions: CAB
Managed to strip out the cab
IMG_4334.jpeg
and connected up the loom for the two extra parking sensors for park assist

IMG_4335.jpeg
Ready to run the loom up to the replacement PLA parking module
IMG_4336.jpeg
 
  • Like
Reactions: CAB
Rear Level Sensor loom redone in correct colour cable and correct seals
IMG_4340.jpeg
IMG_4341.jpeg

Before
IMG_4339.jpeg
At last it’s done properly now and hopefully won’t have water ingress for a third time!
 
Have to say I’m more than disappointed!
IMG_4359.jpeg
IMG_4358.jpeg
IMG_4357.jpeg
IMG_4356.jpeg
How many ****ing joints can you have in one cable run!! Paid a lot of money to have LED headlights professionally retrofitted (spent over £5k on headlights, tail lights and a reversing camera) and this quality of product is appalling!

Needless to say I’ll be redoing it properly!
 
  • Wow
Reactions: CAB
TPMS loom terminated under passenger seat
IMG_4354.jpeg
 
  • Like
Reactions: CAB
LED headlight module sorted

IMG_4331.jpeg
Before (Professional Retrofit wiring)

IMG_4373.jpeg
IMG_4374.jpeg
After - standard colours and correct CAN wire
 
Back
Top