Factory Swivels

S18RVW

Member
T6 Pro
Has anyone got any part numbers for factory swivel bases for a T6. Will single passenger be the same as the single drivers seat?
 
They are intergral to the seat, rather than bolt on like aftermarket.
If you want factory swivels your best bet is trying to get some second hand. I got mine from ebay.
 
@S18RVW
These guys may be worth talking to & not far from you as well.
Next door neighbours to Chris @Dav-Tec - so you could call in there & have an audio upgrade at the same time!!
Win - win, me thinks?
 
Has anyone got any part numbers for factory swivel bases for a T6. Will single passenger be the same as the single drivers seat?
They are different. The swivel in opposite directions
 
Don't bother, fit Sportscraft swivels. At least with those you will be able to swivel both seats without unlatching the front doors.

I ordered a van with factory swivels and was disappointed in that I had to unlatch the doors to swivel the seats. All the others that I have done have had Sportscraft swivels.

I now have a MAN TGE with factory swivels and have the same problem.
 
Which "they" do you mean?
Factory Swivels
Sports craft Swivels
MAN factory swivels
 
Aftermarket ones will always raise the height as they go between the seat and the base.

You will also lose the ability to height adjust as the side seats trims will block the swivel when down.

You can buy aftermarket shortened bases to address some of these issues but you can't always use those if you need the space for your leisure electrics.

Additionally you'll need to lower your handbrake mounting.

See here for OE options

 
Aftermarket ones will always raise the height as they go between the seat and the base.

You will also lose the ability to height adjust as the side seats trims will block the swivel when down.

You can buy aftermarket shortened bases to address some of these issues but you can't always use those if you need the space for your leisure electrics.

Additionally you'll need to lower your handbrake mounting.

See here for OE options

Thanks
 
I'm about to buy a lower base and Sportscraft swivel for the front passenger seat of my Caravelle. I have electric heated seats, is there a way to retain the heated seat wiring and have a swivel or do I need to leave the heater cabling unplugged?

Not been able to find the answer by searching etc.
 
I can't be sure but I think you can make the original wiring loom reach through the hole in the centre of the swivel although you may have to leave it un-clipped. If that's the case be sure that it cannot get trapped when the seat is rotated.
Unless the extra height, which is not much, is a problem to you I would not bother with the lowered base, also be aware of the electrics existing under the left front seat and that you have all of the bracketry to refit all of that on your lowered base if you go for it.
 
Back
Top