Firewall grommet locations

Blitz

Senior Member
VIP Member
T6 Guru
Hi. I'm wanting to fit a CB into my van in the little lower cubby hole. I need to feed the coax through the engine bay is there an excessable hole I can use through the engine fire wall without pulling any of the dash apart?
Thanks
Grant
 
Just at the top of the passenger wheel arch, just remove black under dash trim, pull mat back, and behind the brownish sound proof material is grommet, a bit tight to get out, if you push wire through it comes out directly behind battery
 
Is that the same one as above, from travelvolts ? Remove glove box etc ?
Just at the top of the passenger wheel arch, just remove black under dash trim, pull mat back, and behind the brownish sound proof material is grommet, a bit tight to get out, if you push wire through it comes out directly behind battery
 
Removing the glovebox always helps, but not needed, just lower under dash panel. There is a grommet higher up which removal of glove box is needed
 
Thanks so theirs two their somewhere. I'll look for the lover one first as you suggest. Thanks
 
Back
Top