Front Step Vent with OEM Factory Aux Heating

[Deaky]

hi,just joined the forum for this thread.will these fittings and steps fit into a 2010 T5.1? where is the best place to order them from?

Hi @micksea. Yes they will fit into a T5.1. You can get the parts you need from the forum shop. Message @Pauly.

 

[micksea]

thanks deaky

 

[micksea]

looks like I'm about to start stripping my van again

 

[Fish]

Its worth it.

 

[micksea]

it will be if I can find a deal on a eber kit

 

[oldiebut goodie]

Old post but relevant for those that have trouble tracking down what is needed vent wise - the oem parts are for the factory fitted Webasto Air Top 35000ST but can be used for other heaters, the diameter of the vent parts are 90mm for the Webasto.
Part nos here: Online Volkswagen Transporter spare parts catalogue, Europe market, 2015 model year: body group, auxiliary heater, air guide subgroup, Volkswagen VIN decoder, aftermarket, etka online

There is a VW bracket : Online Volkswagen Transporter spare parts catalogue, Europe market, 2010 model year: body group, auxiliary heater, fasteners, silencer, fuel line subgroup, Volkswagen VIN decoder, aftermarket, etka online also which was for the T5 and the 3500ST and I am led to believe that the mounting points are still current on the latest vans - I cannot check as I don't get my van until late October!

I have one ready for when the van arrives:

 

[Stuthewarrior]

Hi Fish,
Are these measurements for the step vent shown on a T6 ? Only so I can just measure it out on mine if it is.

Regards
Stuart

 

[CarlsT6]

I have a vented front step in my Kombi that doesn't have any sort of light in it.

View attachment 17849

Hi Guys, I’m after one of these steps. Did you purchase from a dealership? I’m after the exact one.

 

[illusion]

Hi guys, has anyone fitted this to the t6.1? looking to go this route within mine i think

 

[DaveyB]

Can’t say for certain as haven’t actually seen the 6.1 up close, but isn’t it just a facelift and therefore the underlying skeleton being the same as the 6? If so, can’t see why you wouldn’t be able to do this. But like i say this is nothing more than a summation rather definitive knowledge.

 

[rod_vw]

You may find that there were some changes from January 2020 but it looks to only be changes in the plastic ducting. Check the online links to ETKA

 

[ldm82]

Hi guys, has anyone fitted this to the t6.1? looking to go this route within mine i think

Yeah, I put the factory ducting, vents and step from an earlier model into my T6.1, all fitted no bother.