Indicators dont flash when van locked

[Daniel French]

Hi All,
My indicators on my 18 plate T6 have stopped flashing when I lock and unlock the van. Does anybody have an idea why this would suddenly occur?
TIA

 

[Bigsidavies]

If one of the doors hasn’t been shut.
Have a look on the dashboards info screen after locking and see if it’s showing the door open symbol. You may have a faulty door lock or actuator so even though the door is physically shut the van thinks it’s open.

 

[Dellmassive]

What he said.



Check the dash to see if it shows all the doors are closed.

 

[Wills]

And tailgate/ barn doors…

 

[Daniel French]

If one of the doors hasn’t been shut.
Have a look on the dashboards info screen after locking and see if it’s showing the door open symbol. You may have a faulty door lock or actuator so even though the door is physically shut the van thinks it’s open.

All the doors are shut and locked and no indication on the dash.
Is there any way of checking the actuators from the doors

 

[Rfkdemon]

It also does this if there is a problem with the deadlocks.

This happened to me when HILO cut through my loom near the interior light during the roof install.

Mat

 

[Bigsidavies]

All the doors are shut and locked and no indication on the dash.
Is there any way of checking the actuators from the doors

If the actuators aren’t working the door will lock and then unlock. Have you physically checked that all the doors are locked after locking with the fob?
Other than that I’ve no other ideas.
Except that a vcds scan may highlight any issue.