Inovit 20" poke - ET35 & ET45

djgriff

Senior Member
VIP Member
T6 Pro
Hi I am looking at purchasing some new wheel and they come with the secs below. My question is I don't want the wheels to poke out beyond the wheel arch's. Can anyone advise on the specs below. Cheers


Size: 20 Inch
Width: 8.5J & 10J
Offset (ET): +35/+40 Respectively
PCD: 5x120
Centre Bore: 72.6mm (Spigots Included)
Max Load (per wheel): 885kg/1950lbs
 
Hi I am looking at purchasing some new wheel and they come with the secs below. My question is I don't want the wheels to poke out beyond the wheel arch's. Can anyone advise on the specs below. Cheers


Size: 20 Inch
Width: 8.5J & 10J
Offset (ET): +35/+40 Respectively
PCD: 5x120
Centre Bore: 72.6mm (Spigots Included)
Max Load (per wheel): 885kg/1950lbs
You shouldn’t get any poke from the wheels, but it can also depend on the tyre size and how low you are.

I can supply the wheels and also with tyres if you haven’t already bought elsewhere.
 
Last edited:
275/40/20 is way too big! No one should be using them on a transporter!
Depends on your van weight, 275/35 ok on rear if you aren’t a t32, you probably want something a bit narrower for the front though!
 
275/40/20 is way too big! No one should be using them on a transporter!
Depends on your van weight, 275/35 ok on rear if you aren’t a t32, you probably want something a bit narrower for the front though!
ok thanks, do you have recommendations for the front?
cheers
 
Old post I know, but I bought some of these a month or so ago off here. I've not yet fitted them as they will be going on with the coilovers a week on Monday. But my ets are different.... et 32 front and 38 rear. Same width wheels though.

I'm guessing they are going to poke out on the front really hope they don't.
 
Back
Top